Fragility Functions for Seismic Risk in Regions with Moderate Seismicity
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents the results of a series of shake table tests carried out on a half-scale single-story unreinforced masonry building with asymmetric openings. First, the unretrofitted building is subjected to seven increasing steps of bidirectional seis ...
This paper proposes methodological developments for quantifying the impact of residual axial shortening of first-story steel columns on earthquake loss estimations in steel moment-resisting frame (MRF) buildings. A new formulation is proposed that accounts ...
Concentrically Braced Frames (CBFs) built before the introduction of the capacity design concept do not usually meet modern seismic design requirements. They are vulnerable to seismic events and they could develop unpredictable failure mechanisms. An exist ...
Seismic assessment of existing buildings is a very important area of research to predict the impact of an earthquake on an area. Over the years, unreinforced masonry buildings have shown to be highly vulnerable to seismic risk. Although Switzerland is cons ...
Performance-based earthquake engineering (PBEE) has become an increasingly popular framework to design, retrofit and manage structures. This probabilistic framework integrates data from the seismic hazard, structural response, damage fragility and damage c ...
Shape memory alloys (SMAs) have gained considerable attention in a broad range of engineering applications. In particular, iron-based SMAs (Fe-SMAs) have been recently developed and used as a cost-effective method for prestressed-strengthening of civil stru ...
Steel lateral load-resisting systems offer a variety of design solutions to ensure a ductile behaviour of a structure during a seismic event, thereby achieving a relatively low earthquake-induced collapse risk, if designed and detailed properly according t ...
Centre suisse de la construction métallique (SZS)2019
Capacity-designed steel moment-resisting frames (MRFs) dissipate the seismic action through inelastic flexural yielding of protected zones located at the beam ends and the first story column bottom end. During low-probability of occurrence seismic events, ...
Hybrid simulations were conducted to evaluate the system-level seismic response of a 4-story steel moment frame building and its gravity framing system through various levels of ground motion shaking. The experimental substructure examined in detail corres ...
Correct detailing and positioning of lap splices is essential in order to prevent premature failure of reinforced concrete structural members. Especially before the introduction of capacity design guidelines, lap splices were often placed in member regions ...