Prototype of a thermally driven heat pump based on integrated organic Rankine cycles (ORC)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
The Laboratory of Industrial Energy systems has evaluated a series of high performance air-water heat pump concepts with the aim to retrofit existing fuel fired boilers for residential hydronic heating systems. The results are published within the framewor ...
This project is evaluating a heat pump cycle with midstage injection at scroll compressors. The injected refrigerant is evaporated partially by an internal heat exchanger (fig. 2.1). A glycol-water heat pump with 12 kW heat capacity at B-5/W50 was built an ...
A complex heating and cogeneration plant including two 3.9 MWth ammonia heat pumps and two 3 MWel gas turbines with heat recovery boilers and three strage tanks has been in operation since 1986. This paper is a result of an expreimental evaluation during t ...
The project High Temperature Heat Pump has been completed in 2 phases. First a new type of scroll compressor with adapted injection port for vapor injection, was tested with an air-water heat pump (fig 2.2, 2.3). This type of heat pump reaches the extreme ...
Intube evaporation tests for R-407C and R-407C/oil are reported for a plain copper tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5 psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly th ...
Replacing conventional boilers by air to water heat pumps represents a major market opportunity and a contribution to more sustainable heating approaches. However, such retrofit situation impose tough technical requirements which must be met in order to de ...
This review highlights the major advantages and challenges of mechanically driven heat pumps and refrigeration systems with focus on multi-temperature applications. Different design strategies are presented, including cycles with multi-stage compressors, e ...
In this report different air-water heat pump cycles under the operating conditions of the retrofit market and in the low heating power range are examined. The already existing heat pump models show excessive power and efficiency loss at very low ambient te ...
