Phase change behavior of ammonia-water mixtures in corrugated plate heat exchangers
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Single pan thermal analyses (SPTA) have been performed on Cu–14.5 wt.% Sn, Cu–21.3 wt.% Sn and Cu–26.8 wt.% Sn peritectic alloys. For this purpose, a SPTA assembly has been built and calibrated. As the latent heat is a function of temperature and compositi ...
The combination of reaction calorimetry and supercritical fluids as reactants and/or solvent holds great potential for the optimization of chemical processes using high pressure near-critical and/or supercritical mixtures. The very specific properties of s ...
The study deals with theoretical as well as with practical aspects of the conversion of geothermal heat to electricity. The report is divided into three parts: • Part I: General study • Part II: Practical experience: planning & operation of geothermal powe ...
Important reductions of refrigerant amounts can be achieved by using secondary refrigeration fluids. Ice slurry is a two-phase fluid and thus, compared to single phase secondary refrigeration fluids, offers the advantage of the latent heat of fusion when t ...
The behaviour of a pile subjected to thermo-mechanical loads was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. To accomplish this, a pile situated in a building under construction was equ ...
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
The tubes in shell-and-tube condensers, widely used in refrigeration and chemical process industries, are subjected to condensate inundation from the neighboring tubes. The aim of the present investigation is to study the effect of condensate inundation on ...
Experimental studies were performed to investigate the flow patterns of liquid films of R-134a on vertical arrays of horizontal tubes under adiabatic test conditions at room temperature and during condensation at a saturation temperature of 304 K. Three ar ...
Thermo-economic modelling techniques are well known techniques to optimise power plant designs. These methods are usually based on the definition of a superstructure that includes the major options of the design. If this approach has proved to be appropria ...
Ozonation membrane contact was carried out with a tubular membrane module to study the effects of the flow rates and the temperatures of the liquid phase on ozone transfer and on the enhancement of mass fluxes. Changes in liquid temperature gave both posit ...
