Microstructural evolution of a commercial ultrafine alumina powder densified by different methods
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A 2D plane-strain dynamically propagating crack under tensile loading is simulated with cohesive elements. Information of the main crack is extracted from a diffuse crack network with the use of graph properties. Micro-transgranular fracture properties are ...
The Lucerne University of Applied Sciences has been analysing and monitoring the low- temperature district heating and cooling network (LTN) “Suurstoffi” since 2012. The analysis showed that heating demand was twice as high as expected. On the other hand, ...
Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...
This paper presents the optimization of a micro gas preconcentrator (mu-GP) system applied to atmospheric pollution monitoring, with the help of a complete modeling of the preconcentration cycle. Two different approaches based on kinetic equations are used ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Elongated coarse P{011}-oriented grains are frequently observed after annealing of cold-rolled Al–Mn alloys with a highly supersaturated solid solution level. In this study, important factors affecting the strength of the P-texture component after ann ...
The interaction between recrystallization and concurrent precipitation is strongly dependent on the heating rate during annealing. In this study, the effects of heating rate on the grain structure, recrystallization texture and resulting mechanical propert ...
Plane-strain tensile loading numerical simulations of dynamic crack propagation in silicon nitride microstructures are conducted. The strength and toughness are evaluated as a function of strain rate and microstructural parameters, including grain size and ...
In this paper, the results of a 2D full field grain growth model are compared with several 2D mean field grain growth models (Burke and Turbull model and Hillert/Abbruzzese model), using simplified assumptions of isotropic grain boundary energy and mobilit ...
This paper presents the design and implementation of a foil gas preconcentrator (FGP) on polyimide (PI) substrate. One novelty of the paper is that our device is made on flexible foil by using printing whereas all preconcentrators seen in literature are ma ...