Publication

Sensitivity of Stresses and Failure Mechanisms in SOFCs to the Mechanical Properties and Geometry of the Constitutive Layers

Related publications (46)

Proliferation-driven mechanical compression induces signalling centre formation during mammalian organ development

Localized sources of morphogens, called signalling centres, play a fundamental role in coordinating tissue growth and cell fate specification during organogenesis. However, how these signalling centres are established in tissues during embryonic developmen ...

Nature Portfolio2024

Quantitative study of the thickness-dependent stress in indium tin oxide thin films

Varun Gupta

A quantitative analysis of stress in indium tin oxide (ITO) films with varying thicknesses was conducted using high-precision stylus profilometry. The experimental results revealed a transition of the stress type from tensile to compressive as the ITO film ...

Lausanne2023

Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction

Residual stresses are investigated for the first time in a dissimilar AA1050-DP450 steel magnetic pulse weld using neutron diffraction. Close to the joint interface, tensile residual stresses are observed in the Al sheet and compressive residual stresses a ...

ELSEVIER SCI LTD2021

Variational phase-ﬁeld study of adhesive wear: elastic and elastic-plastic models

Sylvain Collet

Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical ﬁtting parameters. We propose a study of the physical processes that lead to wear at the scale of the surface roughness, where adhe ...

2020

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Variational phase-field continuum model uncovers adhesive wear mechanisms in asperity junctions

Jean-François Molinari, Sylvain Collet

Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical fitting parameters, which range several orders of magnitude. Major advances in tribology have recently been achieved via Molecular ...

2020

Can automotive MEMS be reliably used in space applications? An assessment method under sequential bi-parameter testing

Volker Gass, Olha Sereda, Maxime Auchlin

Commercial Off-The-Shelf (COTS) automotive inertial measurement units were subjected to severe accumulative stress conditions: thermal shocks (high temperature gradients), temperature cycling (low gradients) and mechanical vibration are combined in an A-th ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Investigations and numerical modeling of mechanical properties of tempered martensitic steel Eurofer97 at various loading rates, temperatures and after spallation irradiation

Serafin Knitel

The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...

EPFL2018

Improved thermo-mechanical reliability of anode-supported solid oxide fuel cells

Fabio Greco

Solid oxide fuel cell (SOFC) based systems are co-generators of electricity and heat that excel for their high efficiency, low pollutant emissions and fuel flexibility. Their reliability is close to meet the requirements for market deployment. Recent resea ...

EPFL2018

Tailoring residual stress profile of Selective Laser Melted parts byLaser Shock Peening

Roland Logé, Eric Boillat, Nikola Kalentics

The paper describes a new approach in controlling and tailoring residual stress profile of parts made bySelective Laser Melting (SLM). SLM parts are well known for the high tensile stresses in the as – built statein the surface or subsurface region. These ...

2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.