Test Result of a Full-Size Nb3Sn Conductor Developed for the ITER TF Coils
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Several conductor designs featuring High Temperature Superconducting (HTS) stacked tapes for fusion coils are being proposed. These conductors are planned to operate in time-varying magnetic field and current; thus, the estimation of AC losses is fundament ...
For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...
Direct current tests performed in the past on the conductor samples of the toroidal field (TF) ITER coils revealed degradation of current sharing temperature, T-cs. The degradation progresses with repetitive electromagnetic loading, and also with thermal c ...
High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...
The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets.One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...
EPFL2022
, , , , , , , , ,
We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PRO ...
Complete electric and magnetic field solutions of an overhead conductor above a lossy earth are derived in this letter, and “mode transition” from a low-frequency quasi-transverse electromagnetic (TEM) to a high-frequency transverse Magnetic (TM) mode has ...
The series production of Nb3Sn and NbTi cable-inconduit conductors (CICC) for the winding of various coils in the International Thermonuclear Experimental Reactor (ITER) magnet system is being completed in 2015. The tests of the ITER conductor samples are ...
The European DEMOnstration Fusion Power Plant (EU-DEMO) is planned to be an intermediate step between ITER experimental reactor and a commercial fusion power plant, which should demonstrate feasibility of grid electricity production at a level of several h ...
The Korean Domestic Agency (KODA) for the International Thermonuclear Experimental Reactor (ITER) project has taken the responsibility of the procurement of cable-in-conduit conductors for the ITER toroidal field magnet. While procuring 27 conductor unit l ...
