Nanophotonic technologies for single-photon devices

The progress in nanofabrication has made possible the realization of optic nanodevices able to handle single photons and to exploit the quantum nature of single-photon states. In particular, quantum cryptography (or more precisely quantum key distribution, QKD) allows unconditionally secure exchange of cryptographic keys by the transmission of optical pulses each containing no more than one photon. Additionally, the coherent control of excitonic and photonic qubits is a major step forward in the field of solid-state cavity quantum electrodynamics, with potential applications in quantum computing. Here, we describe devices for realization of single photon generation and detection based on high resolution technologies and their physical properties. Particular attention will be devoted to the description of single-quantum dot sources based on photonic crystal microcavites optically and electrically driven: the electrically driven devices is an important result towards the realization of single photon source "on demand". A new class of single photon detectors, based on superconducting nanowires, the superconducting single-photon detectors (SSPDs) are also introduced: the fabrication techniques and the design proposed to obtain large area coverage and photon number-resolving capability are described.

Growth and characterization of single quantum dot devices for fiber-based quantum communications

Blandine Alloing

Single photon sources have recently attracted significant interest for their potential role in the future applications of quantum cryptography, and in the longer term, quantum computing. Among the different types of single photon emitters, semiconductor quantum dots (QDs) are good candidates as they combine discrete electronic transitions with the possibility of electrical excitation. Self-assembled InAs QDs on GaAs substrate are by far the most studied system as they can easily be grown into a microcavity structure. Embedding these into a microcavity is important as it increases the extraction efficiency, directionality and speeds up the photon emission. Until now, most studies have concentrated on QDs emitting in the λ

EPFL2006

Optical characterisation of single quantum dots emitting at 1300nm

Carl Zinoni

This thesis deals with the optical characterization of single quantum dot devices emitting at 1300nm. Thanks to the development and optimization of the growth technique we were able to achieve at the same time emission at 1300nm and ultra low QD densities. Our single QD devices present clear and reproducible spectral signatures in which we can identify exciton, biexciton and charged exciton transitions. Quasi-resonant excitation at 70K demonstrates background free single exciton transitions, which is very promising for the realization of a single photon device operating at temperatures in easy reach of thermoelectric coolers. A time-correlated single photon counting setup was built and used to measure the radiative lifetimes of single exciton transitions. These measurements also present new evidence on a background emission superposed to the narrow spectral transitions. Demonstration of single photon emission at these wavelengths required building a setup to measure the correlations between fiber-coupled single photons in a 300ps time window, emitted from a nano-device in free space at cryogenic temperatures, and with the capability of maintaining the optical alignment on a micrometer scale for several hours. With such a setup we have demonstrated that our QDs can generate single photon states at 1300nm. We used this single photon source to characterize novel detectors based on superconducting nanowires and measured for the first time the intensity correlation function at 1300nm on single photons from a QD. These detectors show at least 2 orders of magnitude improvement on the signal to noise ratio as compared to InGaAs APDs; this is very important since, for a QKD system, the detector noise, amongst others, determines the maximum distance over which a secure key can be exchanged. It should be noted that, due to the di±culties in these measurements, to date there has been only one other clear demonstration of single photon emission at 1300nm.

EPFL2007

Investigation into the coupling of quantum dots to photonic crystal nanocavities at telecommunication wavelengths

Laurent Balet

Recently, the emission of single photons with emission wavelength in the 1.3 µm telecommunication window was demonstrated for InAs quantum dots. This makes them strong candidates for applications such as quantum cryptography, and in a longer term, quantum computing. However, efficient extraction of the spontaneous emission from semiconductors still represents a major challenge due to total internal reflection at the semiconductor/air interface. In particular, single photon sources based on quantum dots are plagued by low extraction efficiency and poor coupling to single-mode fibers, typically on the order of 10-3 ~ 10-4, which prevents their application to quantum communication. To seek a solution to this problem, this thesis work explores the integration of quantum dots, with emission at 1.3 µm, in photonic crystal microcavities. Photons emitted in a mode of the cavity are funneled out of the semiconductor, and thus bypass the total internal reflection. In addition, the modified density of electromagnetic states in the cavity affects the emission lifetime of a weakly coupled emitter: in resonance, we assist to an increase of the emission rate, known as the Purcell effect, that would allow faster data transmission. Photonic crystal microcavities conveniently address this objective as they provide modes with the required small volumes and high quality factors. They also allow the engineering of the farfield pattern of the cavity modes, and thus of the collection efficiency. In the following pages, after brie y reviewing single photon emitters, the Purcell effect, and photonic crystal cavities, we present our results on the coupling of quantum dots to photonic crystal cavities. We report on the different strategies we used to control the tuning between the cavity mode and the quantum dot emission frequency. We also show our efforts in improving the collection of coupled photons by engineering the shape of the microcavity. Finally, we present our time-resolved measurements demonstrating the Purcell effect under optical and electrical operation.