Dynamic analysis of laminated composite plates traversed by a moving mass based on a first-order theory
Related publications (38)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper is concerned with the development of a general framework for adaptive mesh refinement and coarsening in three-dimensional finite-deformation dynamic-plasticity problems. Mesh adaption is driven by a posteriori global error bounds derived on the ...
By means of a Gleeble machine, the flow stress at steady-state creep in an AA3103 aluminium alloy has been measured for temperatures and strain rates relevant for thermally induced deformations in DC casting. The strain rate has been determined by measurin ...
We investigate adaptive finite element methods for low Mach, steady, laminar combustion. The finite element discretization of the flame equations involves least squares control of streamline derivatives and pressure-velocity coupling as well as a new shock ...
Intube evaporation tests for R-407C and R-407C/oil are reported for a microfin tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly the ent ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200 and 300 kg/m2s (73500, 147000 an ...
Bilateral Master-Slave force reflecting servomechanisms are very interesting and useful devices. The basic principle of these systems is too realise a force and position transformation between the two mechanisms. This paper presents the design of the multi ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported for a plain, horizontal tube. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200, an ...
Experimental test results for flow boiling of pure ammonia inside horizontal tubes were obtained for a plain tube and a microfin tube. Tests were run at a nominal saturation temperature of 4°C, mass velocities from 20-140 kg/m2s, vapor qualities from 1-99% ...