Charge transition levels of nitrogen dangling bonds at Si/SiO2 interfaces: A first-principles study

Peter Broqvist, Philipp Dahinden, Alfredo Pasquarello
2010
Journal paper

Abstract

The defect levels of the nitrogen dangling bond at the Si/SiO2 interface are determined through a density-functional approach. The composition grading at the interface is modeled through crystalline and amorphous models of stoichiometric SiO2, nitrided SiO2, and substoichiometric silicon oxides. The relevant charge transition levels are first determined with respect to the band edges of the parent oxides within a semilocal density-functional scheme. Through the use of band edge shifts and band offsets previously obtained with hybrid functionals, the calculated defect levels are then positioned with respect to a band diagram of the Si/SiO2 interface which shows good agreement with the experimental one. We find that the 0/- charge transition level locates within the Si band gap. The level locates close to the Si valence band for nitrogen atoms in the stoichiometric oxide, but is found to rise across the silicon band gap as the environment of the nitrogen atoms becomes more silicon rich. The latter raise is accompanied by a stabilization of the incorporated nitrogen.

Official source

https://infoscience.epfl.ch/record/172815?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

, , ,

We calculate charge transition levels of various defects at the SiC/SiO2 interface within a scheme based on hybrid density functionals, which accurately reproduce the involved band gaps and band offsets. The defect levels are first evaluated in bulk models of the interface components and then aligned with respect to the interface band diagram through the use of a model interface showing good structural and electronic properties. Interface-specific polarization effects are evaluated separately through classical electrostatics. We considered carbon-related defects involving single atoms and dimers in both the crystalline SiC substrate and the amorphous SiO2 oxide. Our investigation also comprises oxygen-and hydrogen-related defects, including the Si-Si bond (O vacancy), the Si-2-C-O structure, the peroxy linkage, and the hydrogen bridge (Si-H-Si). Among the defects studied, the Si-2-C-O structure represents the best candidate for the high defect density measured near the conduction band of SiC.

2011

The performance of silicon based microelectronic circuits reaches the end of the roadmap. New material systems are required for further improvements in speed and power consumption. Germanium is a possible candidate to substitute silicon for microelectronic devices. Its hole mobility is the highest of all semiconductor materials. Together with its lower band gap it could be an ideal material for energy-saving devices. This thesis is dedicated to first principles studies of the Ge/GeO2 interface through hybrid density functional theory. The substoichiometric region of the interface is of special interest. A wide substoichiometric region is supported by total energy calculations of a set of crystalline model systems. An unexpected structure organization was found through molecular dynamics simulations of substoichiometric GeO. We found that a majority of germanium and oxygen atoms are threefold coordinated, forming valence alternation pairs (VAPs). A detailed energetic analysis located the VAPs in the low-oxygen region of the interface. VAPs show interesting properties : They are prone to charge trapping. The electron trapping level might explain the bad performance of n-type doped devices. Furthermore, VAPs might be at the origin of the difficulties of H passivation at the Ge/GeO2 interface. Since threefold Ge atoms are negatively charged and threefold O atoms are positively charged, VAPs give rise to dipoles. These dipoles may reduce the interface dipole created by the electronegativity difference in the Ge-3O bond. With this mechanism, we can explain the wide range of experimental valence band offsets (VBOs) with the occurrence of different density levels of VAPs at the Ge/GeO2 interface. This suggestion is further confirmed by the determination of the VBO and Ge 3d core-level shift for an atomistic model structure of the Ge/GeO2 interface. Both values are systematically lower than typical experimental values for the Ge/GeO2 interface. Taking the extra dipole into account, our calculated VBOs and XPS shifts are in excellent agreement with experimental values. These results confirm that the structural properties of the Ge/GeO2 interface deviate significantly from its Si counterpart.

EPFL2012

The requirements of present high-performance power electronic systems are exceeding the power density, efficiency, and reliability of silicon-based devices. Silicon carbide (SiC) is a candidate of choice for high-temperature, high-speed, high-frequency, and high-power applications: it has a wide band gap, high thermal conductivity, high saturated electron drift velocity, and high breakdown electric field. SiC is also hard, chemically stable, and resistant to radiation damage. Despite these desirable electronic properties, SiC-based devices are still facing many performance challenges due to the high density of defect states at the SiC/SiO2 interface. This thesis is dedicated to the first-principles study of defects at the SiC/SiO2 interface through hybrid functionals. We first generate a model structure providing a realistic description of the majority bonding arrangements at the 4H(0001)-SiC/SiO2 interface. The description of the electronic structure of the model through hybrid functionals leads to band offsets in excellent agreement with their experimental counterparts. We then study several semiconductor and oxide defects using spin-polarized hybrid density functionals and identify candidate defects responsible for the high density of interface defects measured in the 4H-SiC band gap. Finally, the possibility of growing epitaxial silicate adlayers on SiC is investigated as an alternative approach to greatly reduce the high density of defect states at the SiC/SiO2 interface.

EPFL2008

EPFL2012