Investigation of High Pressure Turbine End-Wall Film Cooling Performances under Realistic Inlet Conditions
Related publications (36)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work presents the influence of splitters on the performance of small-scale turbopumps for organic Rankine cycle applications numerically. Different design parameters, such as impeller diameter at the outlet, number of blades, blade angle at the traili ...
With the future decarbonization of the electricity production, gas turbines will be an important tool for the stabilization of the electricity grid by meeting the peak of energy demand using zero-carbon fuels like synthetic gas and hydrogen.The combustion ...
Two-phase, refrigerant-based cooling offers significant promise for increasing heat densities and energy efficiencies of electronic components. One barrier to wide spread adoption of two-phase cooling solutions is preserving product features deemed essenti ...
Emerging energy-efficient, oil-free radial centrifugal compressors seem promising for small to mid-capacity air conditioning and refrigeration applications. Compressor design must balance trade-offs among impeller diameter, bearing type, and refrigerant se ...
Dredge pumps are usually operated at part-load conditions, in which the low-solidity centrifugal impeller could experience large internal energy dissipation, related to flow separation and vortices. In this study, SST k- and SAS-SST turbulence models were ...
This thesis presents the results of the design and experimental investigation of a patented 10 kWel solid oxide fuel cell (SOFC) system with a thermally-driven anode off-gas recirculation (AOR) fan, the so-called fan-turbine unit (FTU). The system has the ...
A micro steam turbine with a tip diameter of 15 mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kg/h and 2, respectively, the turbine yields a power of 34 W and a total-to-static isen ...
A micro steam turbine with a tip diameter of 15mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kgh-1 and 2, respectively, the turbine yields a power of 34W and a total-to-static isent ...
This paper focuses on a small-scale radial steam turbine which is part of a fan-turbine unit (FTU) realizing the anode off-gas recirculation of a Solid Oxide Fuel Cell (SOFC). Due to the small size of the turbine (15mm diameter), it is not possible to dete ...
In this article, three different modes of a novel integrated system would be evaluated by the application of high temperature Thermal Energy Storage (TES) to produce electricity, cooling, and freshwater. Freshwater is produced using the reverse osmosis (RO ...