Ag-surfaces sputtered by DC and pulsed DC-magnetron sputtering effective in bacterial inactivation: Testing and characterization
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The fabrication of interdigitated titanium nanoelectrode arrays of 50 nm in width and spacing is described in this work. The nanoarrays have been realized using a Ga+ focused ion beam (FIB). FIB milling is typically accompanied by redeposition of removed m ...
The antistatic and hydrophilic properties of acrylic, polyamide, and polyester fibers were improved by treatment with a polymerizable vinyl monomer contg. an ammonium group and a polymerizable monomer contg. a carboxyl or sulfo group and irradiating. Thus, ...
(Akademie der Wissenschaften der DDR, Ger. Dem. Rep.).1981
The bacterial inactivation efficiencies of silver metal and oxides and their combinations on textile fabrics was investigated to evaluate the disinfectant action on airborne bacteria. The inactivation performance was seen to depend on the amount of silver ...
Pb(Zr,Ti)03 thin films with compositions close to the morphotropic phase boundary deposited onto electroded Si substrates have potential for use in ferroelectric memories, sensors and micromechanical devices. The microstructures of such films prepared by i ...
Distributed strain measurements on synthetic fibre ropes as used in marine applications are reported. The ropes incorporate single mode fibre-optic sensors for strain measurement. A Brillouin-amplification-based distributed strain measuring system has been ...
Society of Photo-Optical Instrumentation Engineers1999
Nanocryst. solar cells were made by incorporation of cis-dithiocyanato-bis(2,2'-bipyridyl-4,4'-dicarboxylate) ruthenium (II) into sputter deposited titanium oxide films. After a pyridine treatment, it was possible to achieve a photoelec. conversion efficie ...
Single crystals of layered semiconductors such as WS2 and MoS2 have already proven their efficiency as active elements in photovoltaic cells. Due to their high optical absorption coefficient in the visible range, these materials could be used in the form o ...
The microstructure and chemical composition of sputtered thin films are strongly correlated with the deposition conditions. In the present work, we report the investigation of the film composition by electron probe microanalysis and photoemission experimen ...
