Local Electronic Structure and Density of Edge and Facet Atoms at Rh Nanoclusters Self-Assembled on a Graphene Template

The chemical and physical properties of nanoclusters largely depend on their sizes and shapes. This is partly due to finite size effects influencing the local electronic structure of the nanocluster atoms which are located on the nanofacets and on their edges. Here we present a thorough study on graphene-supported Rh nanocluster assemblies and their geometry-dependent electronic structure obtained by combining high-energy resolution core level photoelectron spectroscopy, scanning tunneling microscopy, and density functional theory. We demonstrate the possibility to finely control the morphology and the degree of structural order of Rh clusters grown in register with the template surface of graphene/Ir(111). By comparing measured and calculated core electron binding energies, we identify edge, facet, and bulk atoms of the nanoclusters. We describe how small interatomic distance changes occur while varying the nanocluster size, substantially modifying the properties of surface atoms. The properties of under-coordinated Rh atoms are discussed in view of their importance in heterogeneous catalysis and magnetism.

Growth and Magnetism of Nanostructures Investigated by STM, MOKE, and XMCD

Alberto Cavallin

This thesis presents our studies on nanostructures growth and magnetism, mainly based on scanning tunneling microscopy (STM), magneto-optical Kerr effect (MOKE), and x-ray magnetic circular dichroism (XMCD) measurements. In most of these experiments, nanostructures were grown by molecular beam epitaxy on single crystal substrates under ultra high vacuum conditions. Our combined morphological and magnetic investigations aim at an atomic-level description of the nanostructures magnetic properties. In particular, we are searching for strategies to design the smallest ferromagnet with stable magnetization at room temperature to be used in devices such as magnetic random access memories, storage media, and sensors. A critical factor in pursuing this aim is the determination and control of the magnetization reversal mechanism. Different reversal mechanisms may occur in the nanostructures we considered: either all the spins quasi-coherently rotate or a domain wall is nucleated and propagated along the particle. We prepared monolayer-high Co islands on Pt(111) with compact and ramified shape by adjusting the deposition temperatures and coverages for a sequence of deposition and annealing steps. Combining field-dependent magnetization curves and temperature dependent zero-field susceptibility measurements we identify a size- and shape-dependent transition from quasi-coherent to domain wall propagation reversal regimes. In a second study we investigated a system which according to a recent publication presents many of the characteristics desired in bit patterned magnetic media for ultra-high density storage devices. In particular, it was claimed that Co nanoclusters, growing in registry with the GdAu2/Au(111) moiré periodic substrate, and featuring a density of 52 Tera/in2, present out-of-plane remanent magnetization at T = 300 K. At odds with this claim, no perpendicular magnetic anisotropy was found in our combined MOKE and STM study, which shows an in-plane remanent signal appearing only for coalesced islands. A third study is devoted to FeRh, an alloy material which, thanks to its peculiar magnetic phase diagram, has been proposed coupled to FePt for advanced magnetic recording schemes. We present the first observation of low temperature stabilization of the ferromagnetic (FM) phase in FeRh chemically ordered crystals. Nanocrystals measuring 3.3 nm in diameter have B2 structure with alternating atomic Fe and Rh layers. XMCD demonstrates FM alignment of the Fe and Rh magnetic moments of 3 and 1 μB, respectively. In sharp contrast to FeRh bulk and thin films, which show antiferromagnetic iii Abstract (AFM) order below 300 K, the low-temperature FM 3.3 nm nanocrystals are the hallmark of a size-dependent AFM-FM transition temperature. Finally we present our results towards creation by chemical vapor deposition of a “mille-feuille” structure composed of graphene and magnetic nanoclusters. To realize this objective we optimized the cluster size, composition, and annealing temperature to obtain a compromise between graphene syntesis and cluster coalescence. We demonstrate by STM that annealing to T = 720 K in ethylene stabilizes Ir-seeded clusters against diffusion and coalescence, and by Auger Electron Spectroscopy (AES) that Ni-coated clusters can be covered with up to half of the Carbon contained in a graphene layer.

EPFL2013

Growth and characterization of specific self-assembled supramolecular architectures at crystal surfaces

Marta Canas Ventura

In the framework of this thesis self-assembled supramolecular architectures of several molecular species on crystal metal surfaces are characterized. These investigations combine results obtained by means of scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), X-Ray Photoelectron Spectroscopy (XPS), and Near-Edge X-Ray Absorption Fine Structure Spectroscopy (NEXAFS). The interest in controlling the formation of specific arrangements of supramolecular ensembles at surfaces is motivated to a great extent by the prospect to design molecular devices and nanomaterials with customized properties. The goal is a "spontaneous" creation of targeted, well-ordered molecular architectures, which shall be achieved by taking advantage of the molecule's propensity to self-assemble. Control means, in this context, predictability. This term address the accuracy of the prediction of the structures resulting from molecular self-assembly for systems exhibiting different characteristics. Here, system stands for a particular combination of a single-crystal surface and adsorbed molecular species. In a first part, the focus is given to the impact of a Pd(111) surface exhibiting high chemical activity. Due to surface induced deprotonation two resulting chemical states are found for the adsorbed terephthalic acid species. Deprotonation of the carboxyl moieties is observed to affect the topology of the molecular assemblies even though hydrogen bonds (H-bonds) are responsible for the stabilization of assemblies of both, intact and deprotonated molecular species. Therefore, the selective fabrication of a single specific molecular structure becomes a challenge when the surface is prone to induce chemical reactions. Secondly, a molecular species exhibiting conformational flexibility is studied on a largely inert Au(111) surface. It is observed that the characteristic conformational flexibility is also active on the surface, and the molecule is found to adopt different conformations depending on the locally most favorable bonding motif. In particular, phenyl groups may undergo a rotation such that one-dimensional chains can be stabilized by means of intermolecular H-bonds. This phenomenon is very interesting from an adsorbate-substrate interaction point of view, but it limits the predictability of supramolecular structures formed upon self-assembly. In a third step, a comparative study of the self-assembly of three closely related molecular species highlights the impact of concurrent competing intermolecular interactions. Molecules exhibiting an increasing number of possible interaction channels are found to assemble into an increasing number of distinct supramolecular architectures. The most flexible molecular species allowing for different hydrogen-bonding patterns as well as dipolar coupling self-assembles into various structurally complex architectures. Structural predictability, however, is low since the formation of one or the other assembly appears to depend on small variations in sample preparation conditions and on poorly controllable local surface properties. Finally, a system where the resulting structures fully agree with predictions evidences the possibility to control the formation of targeted specific supramolecular architectures. The formation of well ordered bimolecular ribbons and wires over extended length scales is accomplished by the rational choice of both, complementary building blocks for the selective formation of three-fold H-bonds and a nanostructured surface to guide the molecular self-assembly. Furthermore, the impact of H-bond formation on the electronic structure of self-assembled molecular building blocks is probed by STS measurements. The experimental data reveal shifts in the electronic levels depending on the H-bond configuration and on the local characteristics of the underlying surface. In order to improve the precision of such a study, single molecules, homo- and heteromolecular dimers as well as trimers are successfully isolated and assembled by molecular manipulation with the STM tip. Further STS studies on such artificially assembled structures are suggested.

EPFL2008

Magnetic Properties of Surface Adsorbed Metal Adatoms and Dimers

Dante Philippe Sblendorio

This thesis investigates the magnetic properties of single atoms and dimers adsorbed on graphene and oxide decoupling layers supported by single crystal metal substrates, using scanning tunneling microscopy (STM) and spin-polarized scanning tunneling microscopy (SP-STM). The goal is twofold: to use SP-STM to further advance the understanding of the interactions that determine the magnetic stability of Dy adatoms on graphene/Ir(111) and Ho adatoms on MgO/Ag(100), and to use insights from these systems to motivate the study of new systems-- mainly, IrCo heterodimers on graphene/Ir(111).For Dy adatoms on graphene/Ir(111), the characteristic lifetime of the spin system is measured as a function of temperature and tunnel bias, probing the available magnetization reversal pathways in the energy level diagram. The necessity of including the intra-atomic exchange to correctly describe spin lifetimes is demonstrated. In addition, naturally abundant Dy isotopes possess two possible nuclear spin values. Models of both nuclear spin cases of Dy are compared, and shown to produce similar behavior in the temperature and bias ranges probed by SP-STM. Furthermore, accounting for both nuclear spin cases allows for modeling of X-ray magnetic circular dichroism (XMCD) magnetization sweeps. For Ho adatoms on MgO/Ag(100), novel measurement protocols are used to determine the zero-field stability, and the correct ground state model. These protocols are also used to induce magnetic state reversal via Landau-Zener tunneling at avoided level crossings due to the hyperfine interaction. Finally, the study of the IrCo heterodimer adsorbed on graphene is motivated with stability considerations derived from the studies of Dy adatoms on graphene/Ir(111) and Ho adatoms on MgO/Ag(100), in addition to calculations based on density function theory (DFT). Strategies of engineering these heterodimers using statistical growth and atomic manipulation are successfully implemented. The heterodimer is highly mobile on graphene/Ir(111) and displays geometric instability, consistent with its predicted upstanding geometry. Despite this, measurement via STM and SP-STM is demonstrated. Observations are consistent with the robust magnetic stability expected from DFT studies, but additional investigation is needed to disentangle the measurements made thus far.

EPFL2022