Modelling the time-dependent rheological behaviour of heterogeneous brittle rocks
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The numerical simulation of concrete dams subject to earthquake loading requires realistic material laws which take into account material properties as effected by seismic action. Experiments under simulated seismic action were performed to examine the eff ...
Traction tests on soft tissues show that the shape of the stress strain curves depends on the strain rate at which the tests are performed. Many of the constitutive models that have been proposed fail to properly consider the effect of the strain rate when ...
Plastic deformation under uniaxial longitudinal tension and compression is investigated for pure aluminum reinforced with a high volume fraction of parallel alumina fibers. The matrix sub-structure is also examined in transmission electron microscopy. The ...
The development of a conceptual framework to test different viscoelastic constitutive laws is presented. This framework has the advantage of satisfying a priori the thermodynamic restrictions and is valid for large deformations. In addition, the different ...
Synchrotron x-ray imaging and stress measurements of diamond-anvil cell gaskets revealed large elastic strains at the diamond tip at a pressure of 300 gigapascals. The diamond, generally considered a rigid body, bent 16 degrees over a distance of 300 micro ...
Modelling represents an important tool in modern material processing which no longer follows the traditional trial and error route but rather represents what may be termed a right first time technology [1]. To successfully model technological solidificatio ...
Two tensile-strained GaxIn1-xP / InP (001) heterostructures (with x = 6.5% and x = 11.2%) have been studied by TEM and cathodoluminescence. In both structures stacking faults and twins, located in the epilayer, have been found preferably along the [(1) ove ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...
By means of a Gleeble machine, the flow stress at steady-state creep in an AA3103 aluminium alloy has been measured for temperatures and strain rates relevant for thermally induced deformations in DC casting. The strain rate has been determined by measurin ...
Transient creep experiments have been performed on poly-quasicrystalline specimens of the icosahedral Al-Cu-Fe phase. Three temperatures (870, 960 and 1000 K) have been selected in the ductile regime for creep stresses that range between 30 and 320 MPa. In ...
