Material Study of Micromachined Thin Film Solid Oxide Fuel Cells
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fuel Cells are electrochemical devices that are able to directly convert chemical energy to electrical energy, without any Carnot limitation. Hence, their energy efficiencies are relatively high. Among the various types of fuel cells, solid oxide fuel cell ...
We develop SOFC based on a NiO–YSZ anode support, a thin YSZ layer (5–10 micron) and a LaSrMnO3 cathode. Mn and Ni can dissolve into thin zirconia during high temperature fabrication. On cells, we consistently measured higher ohmic losses than expected fro ...
The present work investigates the possibility of selective electrochemical metal deposition on ion implanted p-Si. The idea is that defects introduced into the substrate by ion implantation make it more susceptible to electrochemical reactions compared to ...
This thesis covers the analysis of the catalytic growth of carbon nanotubes under well de fined conditions, the optimization of the field emission properties of those structures and introduces a model for the growth mechanism based on the experimental resu ...
Aluminum is produced by the electrolytic reduction of alumina dissolved in molten cryolite. This process requires carbon anodes which are consumed during the electrolysis. The anodes contribute roughly with 15% to the total aluminum production cost. If the ...
L’objectif du travail entrepris est de développer un outil permettant la simulation dynamique d’un syteème de pile à combustible à haute température (SOFC). Des modèles génériques ont été développés afin de pouvoir représenter les différents composants du ...
Localized electrochemical deposition (LECD) is an emerging technology for inexpensive and effective fabrication of high-aspect-ratio microstructure of diverse materials. Microradiology with coherent X-rays enabled study of this process in real-time. This l ...
Processing issues for the fabrication of capacitive micromachined ultrasonic transducer (cMUT) arrays have been studied using surface micromachining. This work focuses on the critical steps of process fabrication such as membrane formation, sacrificial lay ...
LENI activities in SOFC are focused on development of a new planar stack concept based on anode supported cells in collaboration with the company HTceramix SA. Modeling of repeat element, stack and systems is starting in parallel. This work presents a mode ...
A SOFC, with a solid electrolyte layer and at least one anode layer constituting a stratified structure. The anode layer incorporates a twice substituted lanthanide chromite, substituted by Sr on A sites and by Ni or Cu on B sites. The stratified structure ...
