Publication

Separation of the polymer matrix and the fibrous reinforcement during compression moulding of Glass Mat Thermoplastics (GMT)

Related publications (40)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

, ,

Thermoplastic compression resin transfer moulding coupled with injection moulding is an appealing process for the production of thermoplastic composites. However, its implementation at an industrial scale remains challenging as variotherm injection mouldin ...

SAGE PUBLICATIONS LTD2022

Study on Mechanical Performance of Prestressed UHPFRC U-Beam Bridges

Eugen Brühwiler

The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...

2021

Two-dimensional crack growth in FRP laminates and sandwich panels

Aida Cameselle Molares

Fiber-reinforced polymer (FRP) composite materials are currently being selected for the design of lightweight and efficient structural members in a wide number of engineering applications. Sandwich panels with glass fiber-reinforced polymer (GFRP) face she ...

EPFL2019

Evaluation of grout materials for CFRP ground anchors with strap ends

Thomas Keller, Anastasios Vassilopoulos, Haifeng Fan

An evaluation of cement- and resin-based grout materials for applications in carbon fiber-reinforced polymer (CFRP) ground anchor heads composed of high-strength grout and a CFRP strap was conducted. Uniaxial compression experiments were performed on cylin ...

Elsevier2017

Permanent post-tensioned ground anchors are widely used for the stabilization of different structures in civil engineering. Carbon fiber-reinforced polymer (CFRP) tendons have been proposed to replace steel tendons in ground anchors to solve the durability ...

EPFL2017

The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II - Modeling

Véronique Michaud, John Botsis, Georgios Pappas

This article reports modeling techniques and results based on experimental Mode I characterization of a layered woven GFRP material with tufting reinforcement. Standard tuft and loop-less geometries are investigated on three different areal patterns to eva ...

Elsevier2017

H-SA700 is a type of new ultra-high-strength structural steel that is more environmentally friendly and more suitable for mass production than conventional high-strength steel. The objective of this paper is to contribute to the practical application of CF ...

International Association of Earthquake Engineering2017

, ,

Similarly to the post-buckling behavior of steel girder webs, the post-wrinkling behavior of glass fiber reinforced polymer (GFRP) cell-core sandwich webs can increase their ultimate shear strength. Post wrinkling is, however, different from post-buckling ...

Elsevier2016

Composite materials and, in particular, Carbon Fibre Reinforced Polymers (CFRP) have been well studied and developed in the past years due to their advanced mechanical characteristics. These materials are used in several different application fields, such ...

EPFL2016

Screening method for the onset of bonding of molten polyamide resin layers to continuous fiber reinforced laminate sheets

Martyn Douglas Wakeman

Thermoplastic polymer composites (TPC) with multiple fabric layers of continuous fiber reinforcement are laminate sheets designed to be thermally stamped and overmolded leading to low cycle times and thus high volume composite parts. Injection over-molding ...

2016