Optimizing strength and toughness of nanofiber-reinforced CMCs
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A durability study was performed on a pultruded glass fiber reinforced polymer (GFRP) compression element of a hybrid GFRP/steel joint for concrete structures. GFRP elements were immersed in alkaline pore water solutions of different temperatures during 18 ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
A model for the homogenization of the elastoplastic properties of particle reinforced composites is proposed. The microstructure is described by means of a novel technique, consisting of generating particles in a pre-existent constrained Delaunay tetrahedr ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...
A probabilistic method for the strength prediction of adhesively bonded double lap joints composed of pultruded GFRP adherends subjected to quasi-static axial tensile loading is presented. The prediction method is based on the experimentally determined mat ...
The role of reinforcing phase contiguity in high volume fraction particulate composites is investigated using model composites of pure aluminium reinforced with α-Al2O3 particles. To produce the composites, alumina particle (5µm) preforms were either loose ...
Direct load transmission experiments on hybrid short-span beam specimens for a novel bridge deck were performed. The sandwich construction consists of three layers: a fiber- reinforced polymer composite (FRP) sheet with T-upstands for the bottom skin, ligh ...
Internal damage in uniaxial continuous alumina fibre-reinforced aluminium is measured by acoustic emission during tensile straining in the fibre direction. Over most of the loading history spatially uncorrelated fibre fragmentation occurs, consistent with ...
Aluminum matrix composites reinforced with mixtures of diamond and SiC particles of equal size were produced by gas pressure assisted liquid metal infiltration. Replacing SiC gradually by diamond particles results in a steady increase of thermal conductivi ...
We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...
