Study on the definition of dTmin for heat recovery
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This project is concerned with the heat integration of batch processes. A former project developed Pinch Analysis based procedures (PinchBatch) for the supertargeting of batch processes, as well as for the design and optimization of indirect heat recovery ...
A comparative study has demonstrated that the formerly developed Pinch Analysis (PA) based targeting and design methods outperform (in both heat recovery and cost-effectiveness) the simplified combinatorial design methods proposed by other authors (namely ...
This work addresses the indirect heat integration (i.e. resorting to intermediate heat storage) and the direct heat integration (i.e. heat exchanges between coexisting process streams) of batch processes. Tools and methods for the targeting of these two li ...
The increasing importance of sustainability in urban and architectural design is strongly questioning the actual logic of built environment dispersion. In this context, the regeneration of urban wastelands constitutes an important potential for urban densi ...
Among the structure independent approaches of process integration, pinch technology has been shown for continuous processes to be extremely powerful to develop energy efficient processes and enhance synergic effects within and between processes. The earlie ...
For the refurbishment projects, one of the most important problems is to evaluate the economical efficiency of the project. It is difficult to estimate, with good accuracy, the hydraulic efficiency in situ for existing configurations and even more difficul ...
The project High Temperature Heat Pump has been completed in 2 phases. First a new type of scroll compressor with adapted injection port for vapor injection, was tested with an air-water heat pump (fig 2.2, 2.3). This type of heat pump reaches the extreme ...
In the previous issue of the IEA Heat Pump Centre Newsletter (Vol, 12, No.3, pp. 29-31), an article by these authors described the use of pinch analysis (also known as pinch technology) in a buildings application. This article describes a similar procedure ...
