Fiber-Optic Distributed Sensor Based on Hybrid Raman and Brillouin Scattering Employing Multiwavelength Fabry–Pérot Lasers
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A novel technique to produce large all-optically controlled tunable delays of 100 ps pulse train in optical fibers is demonstrated. The configuration of the delay line basically consists of two main stages: the wavelength conversion via semiconductor optic ...
Several applications are pushing the development of high performance mode-locked lasers: generation of short pulses for extremely high bit rate transmission at 100 Gb/s and beyond, all-optical clock recovery at 40 Gb/s and beyond, generation of millimeter ...
Being currently performed on highly complex and expensive equipments, active optical alignment of single mode 10 Gb/s transmitters and receivers is proving to be the bottleneck process for high volume manufacturing. In order to alleviate this production bu ...
We experimentally demonstrate an extremely simple technique to achieve pulse advancements in optical fibers by using both spontaneous amplified and stimulated Brillouin scattering. It is shown that the group velocity of a light signal is all-optically cont ...
Fiber slow light systems are at a turning point moving from a laboratory research to real applications. The possibility to shape the spectral resonance in Brillouin slow light leads to innovative solutions and makes possible the realization of optimized co ...
In this paper we demonstrate a long-range distributed strain and temperature optical fiber sensor using Brillouin optical time-domain analysis in conjunction with optical pulse coding. Compared to standard BOTDA, pulse coding provides higher signal-to-nois ...
10-Gb/s modulation speed and transmission over 10-km SM fiber with BER < 10(-11) up to 100 degrees C temperature are achieved with optimized wafer-fused GaAs/AlGaAs-InP/InAlGaAs VCSELs incorporating re-grown tunnel junction. These VCSELs operate in the 131 ...
A new generation of 10 Gb/s wafer fused VCSELS show high single mode output in excess of 2mW at 80 degrees C (6mW at 20 degrees C) in the 1310 nm band and 1.5mW at 80 degrees C (4 mW at 20 degrees C) in the 1550 nm band. Error free transmission over 10 km ...
Performance monitoring is one of the key features to create self-managed optical networks. Monitoring the characteristics of an optical channel is important for designing robust and reliable optical telecommunication system. This thesis examined the use of ...
All-optical multicasting of a 320-Gb/s intensitymodulated return-to-zero signal with subsequent simultaneous sampling by a single parametric gate is experimentally demonstrated. The architecture used a two-pump broadband fiber-optic parametric amplifier fo ...
Institute of Electrical and Electronics Engineers2009
