Atmospheric Turbulence Effects on Wind-Turbine Wakes: An LES Study

Fernando Porté Agel, Yu-Ting Wu
Mdpi Ag, 2012
Journal paper

Abstract

A numerical study of atmospheric turbulence effects on wind-turbine wakes is presented. Large-eddy simulations of neutrally-stratified atmospheric boundary layer flows through stand-alone wind turbines were performed over homogeneous flat surfaces with four different aerodynamic roughness lengths. Emphasis is placed on the structure and characteristics of turbine wakes in the cases where the incident flows to the turbine have the same mean velocity at the hub height but different mean wind shears and turbulence intensity levels. The simulation results show that the different turbulence intensity levels of the incoming flow lead to considerable influence on the spatial distribution of the mean velocity deficit, turbulence intensity, and turbulent shear stress in the wake region. In particular, when the turbulence intensity level of the incoming flow is higher, the turbine-induced wake (velocity deficit) recovers faster, and the locations of the maximum turbulence intensity and turbulent stress are closer to the turbine. A detailed analysis of the turbulence kinetic energy budget in the wakes reveals also an important effect of the incoming flow turbulence level on the magnitude and spatial distribution of the shear production and transport terms.

Official source

https://infoscience.epfl.ch/record/182829?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Large-Eddy Simulation of Turbulent Boundary Layer Flow through Wind Turbines and Wind Farms

Yu-Ting Wu

In this thesis, we develop a new large-eddy simulation (LES) framework to simulate atmospheric boundary layer (ABL) flows through wind turbines and wind farms. A Lagrangian scale-dependent dynamic model is used to compute the Smagorinsky model coefficient dynamically based on the local dynamics of the resolved velocity field. The turbine-generated power outputs and the turbine-induced forces (e.g., thrust, lift, drag) are parameterized using two actuator-disk models: (a) the traditional actuator-disk model without rotation (ADM-NR), which uses 1D momentum theory to relate the power output and the uniform thrust force distribution with an incoming velocity; and (b) the actuator-disk model with rotation (ADM-R), which adopts blade element theory to calculate the lift and drag forces (that produce thrust, rotor shaft torque, and power) based on the local blade and flow characteristics. The performance of the LES framework is first evaluated through comparisons with high-resolution velocity measurements collected in the wind-tunnel experiments with the single wake of a stand-alone miniature wind turbine [Chamorro and Porté-Agel, 2010a] as well as the multiple turbine wakes in a model aligned wind farm [Chamorro and Porté-Agel, 2011]. Emphasis is placed on the structure and characteristics of the simulated turbine wakes using the ADM-NR and the ADM-R. In general, the ADM-R yields improved predictions compared with the ADM-NR in the wake regions, where the ADM-NR tends to underestimate the velocity deficit and the enhancement of turbulence intensity in the wakes. Next, the LES framework is used to model multiple turbine wakes and associated power losses in a large wind farm. Here, we propose a new dynamic procedure coupled with the ADM-R to predict turbine power output based on a turbine-model-specific relationship between the shaft torque and the blade angular speed. The Horns Rev offshore wind farm is chosen as a case study since both power data from eighty Vestas V80 wind turbines and flow data from three nearby meteorological masts were available [Barthelmie et al., 2009]. The torque-speed relationship for the V80 turbine is obtained from a series of stand-alone turbine simulations. In the wind farm simulations, the ADM-R gives the best power prediction. Finally, the validated LES framework is used to study atmospheric turbulence effects on wind-turbine wakes in neutrally-stratified ABL over homogeneous flat surfaces with four different aerodynamic roughness lengths. In this study, the simulation result shows that the different turbulence intensity levels of the incoming flow lead to considerable influence on the spatial distribution of the mean velocity deficit, turbulence intensity, and turbulent shear stress in the wake region. In particular, when the turbulence intensity level of the incoming flow is higher, the turbine-induced wake (velocity deficit) recovers faster, and the locations of the maximum turbulence intensity and turbulent stress are closer to the turbine.

EPFL2013

, ,

In this study, large-eddy simulations (LESs) were performed to investigate the effects of changing wind direction on the turbine wakes and associated power losses in the Horns Rev offshore wind farm. In the LES framework, the turbulent subgrid-scale stresses are parameterized using a tuning-free Lagrangian scale-dependent dynamic model, and the turbine-induced forces are computed using a dynamic actuator-disk model with rotation (ADM-R). This dynamic ADM-R couples blade-element theory with a turbine-specific relation between the blade angular velocity and the shaft torque to compute simultaneously turbine angular velocity and power output. A total of 67 simulations were performed for a wide range of wind direction angles. Results from the simulations show a strong impact of wind direction on the spatial distribution of turbine-wake characteristics, such as velocity deficit and turbulence intensity. This can be explained by the fact that changing the wind angle can be viewed as changing the wind farm layout relative to the incoming wind, while keeping the same wind turbine density. Of particular importance is the effect of wind direction on the distance available for the wakes to recover and expand before encountering other downwind turbines (in full-wake or partial-wake interactions), which affects the power losses from those turbines. As a result, even small changes in wind direction angle can have strong impacts on the total wind farm power output. For example, a change in wind direction of just 10 degrees from the worst-case full-wake condition is found to increase the total power output by as much as 43%. This has important implications for the design of wind farms and the management of the temporal variability of their power output.

Mdpi Ag2013

, ,

Accurate prediction of atmospheric boundary layer (ABL) flow and its interactions with wind turbines and wind farms is critical for optimizing the design (turbine siting) of wind energy projects. Large-eddy simulation (LES) can potentially provide the kind of high-resolution spatial and temporal information needed to maximize wind energy production and minimize fatigue loads in wind farms. However, the accuracy of LESs of ABL flow with wind turbines hinges on our ability to parameterize subgrid-scale (SGS) turbulent fluxes as well as turbine-induced forces. This paper focuses on recent research efforts to develop and validate an LES framework for wind energy applications. SGS fluxes are parameterized using tuning-free Lagrangian scale-dependent dynamic models. These models optimize the local value of the model coefficients based on the dynamics of the resolved scales. The turbine-induced forces (e.g., thrust, lift and drag) are parameterized using two types of models: actuator-disk models that distribute the force loading over the rotor disk, and actuator-line models that distribute the forces along lines that follow the position of the blades. Simulation results are compared to wind-tunnel measurements collected with hot-wire anemometry in the wake of a miniature three-blade wind turbine placed in a boundary layer flow. In general, the characteristics of the turbine wakes simulated with the proposed LES framework are in good agreement with the measurements in the far-wake region. Near the turbine, up to about five rotor diameters downwind, the best performance is obtained with turbine models that induce wake-flow rotation and account for the non-uniformity of the turbine-induced forces. Finally, the LES framework is used to simulate atmospheric boundary-layer flow through an operational wind farm. (C) 2011 Elsevier Ltd. All rights reserved.

Elsevier2011

Large-Eddy Simulation of Turbulent Boundary Layer Flow through Wind Turbines and Wind Farms

Yu-Ting Wu

EPFL2013