Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 2. New models (RP-1444)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Heat exchangers are key components of energy conversion systems, including HVAC&R equipment. The compact microchannel design of a heat exchanger (MCHX) allows for significant reduction of its volume, weight, and raw material, in comparison to conventional ...
This paper proposes a novel concept for a loop thermosyphon cooling system, designed for the transistor module of a transformer. The thermosyphon uses a free convection cooled condenser, making the system completely passive, i.e. no energy consumption is n ...
The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...
Transient modeling and regulation of a two-phase on-chip liquid pump cooling cycle is studied. The purpose is to cool down multiple micro-processors in parallel and a set of memories, DC/DC converters in series. The cycle will be incorporated in a blade/dr ...
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
An experimental study is presented to characterize two-phase thermal and hydraulic performance of a prototype corrugated plate heat exchanger with small pressing depth. In particular, upward flow boiling of low pressure refrigerant R245fa was investigated ...
In single- and two-phase flow heat exchangers (in particular "coils"), besides the straight tubes there are also many singularities, in particular the 180° return bends (also called return bends or U-bends). However, contrary to the literature concerning p ...
Curved channels in the form of bends are encountered in many industrial two-phase flow applications, such as U-bends in air-conditioning and refrigeration evaporators and condensers. For engineering design purposes, the evaluation of the pressure loss in t ...
Over the years, much research has been conducted on two-phase flows in straight tubes because these tend, in length, to be predominant in two-phase systems. However, two-phase heat exchangers can also have singularity elements, where the most common type i ...
The lecture will address our experimental work on observing flow patterns and measuring heat transfer coefficients and two-phase pressure drops for evaporating ammonia flows in a horizontal tube over a range of mass fluxes and saturation temperatures. Some ...
