Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A review with 59 refs. concerning characterization of compds. contg. metal-carbon bonds in aq. solns. and pressurization of organometallic systems in water. ...
The gas phase methylation of biphenyl with MeOH over HZSM-5 and HZSM-5 modified with Si(OEt)4 was investigated at atm. pressure in the presence of water. The modification of the outer surface of the catalyst pellets by silicate gives increased selectivity ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported for a plain, horizontal tube. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200, an ...
Electron traps at the nanostructured TiO2 (anatase)/aq. electrolyte interface were studied by electrochem. methods. The transient current decays at different potentials pos. of the flatband potential clearly illustrate the trap-filling process. The more ne ...
Intube evaporation tests for R-407C and R-407C/oil are reported for a microfin tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly the ent ...
We report a simple way to synthesize carbon nanotubes and nanostructures from the solid phase. Vacuum annealing of diamond-like carbon (DLC) films or polyethylene mixed with catalyst in argon atmosphere leads to the formation of nanotubes and nanostructure ...
A very high accuracy, straight vibrating tube type of density flow meter has been used online to measure oil concentraiton of flowing R-134a/oil mixtures. The calibrations covered oil concentrations from 0-6 wt.% oil over the temperature range from -9.4 to ...
In injection-moulded parts, the degree of orientation (anisotropy) varies over the cross-section. Normally, such parts exhibit a layered structure, with a biaxially oriented surface layer (stretching of the flow front during mould filling), a highly orient ...
