Cement substitution by a combination of metakaolin and limestone
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This thesis investigates the effect of different parameters such as Fe (III), D-gluconate and heterogeneous particles on the nucleation and growth of synthetic C-S-H by using the dropwise precipitation method. Firstly, the effect of Fe (III) on the synthet ...
The effect of limestone on the hydration and microstructural development of ultra high performance concrete (UHPC) with different levels of replacement (34%, 54% and 74% by volume) was investigated. Up to 54% replacement of cement by limestone the mixes sh ...
Calcium-containing slag material is produced in iron- and steelmaking worldwide, including Finland. One process route utilizing this calcium, being developed towards large-scale application, is the so-called slag2pcc concept. Using ammonium salts, up to 50 ...
Villigen PSI, World Resources Forum, printed by Paul Scherrer Institute2015
The long-term expansion of calcium aluminate cement and calcium sulfoaluminate cement in the presence of added gypsum has been studied for samples cured under water. Progressively higher amounts of gypsum were added to the CAC or CSA and it was found that ...
The combination of calcined kaolinitic clays and limestone in Limestone Calcined Clay Cement (LC3) is a promising approach to reduce the cost and the CO2 emissions of cement production by reducing the clinker content of cement. This thesis investigates the ...
The content of individual amorphous supplementary cementitious materials (SCMs) in anhydrous and hydrated blended cements was quantified by the PONKCS [1] X-ray diffraction (XRD) method. The analytical precision and accuracy of the method were assessed thr ...
This study focused on understanding the influence of different amounts of calcite impurities (0 to 10% by mass) on the optimal parameters for clay dehydroxylation and the reactivity of the final calcined clay. A surface response experimental design was use ...
This paper evaluates feasibility of alkali activation to boost the reactivity and cementitious properties of recycled glass powder ( GP), when it is used in four different binary mixtures with ordinary Portland cement ( OPC), alkali activated slag or fly a ...
The influence of thermal activation temperature in the pozzolanic reactivity of low grade kaolinitic clay and the impact of calcination products in OPC hydration are assessed in this paper. The raw material, with approximately 40% kaolinite and 40% of 2:1 ...
Supplementary cementitious materials (SCMs) are currently used to replace part of the clinker to reduce the environmental impact of cement and to favor the use of local materials. Two representative SCM have been used in this work: slag and fly ash. Each o ...