Growth of carbon nanotubes on carbon fibers without strength degradation
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidi ...
Molecular dynamics simulations are reported for the pullout force and interfacial friction of single-and multiwall carbon nanotubes (CNT) with interwall sp(3) bonds embedded in a diamond matrix. The van der Waals interaction and sp(3) bonding are shown to ...
The tribological behavior of well-aligned carbon nanotube (CNT)/alumina nanocomposites was studied at multiple length scales. Pin-on-disk, microscratch and atomic force microscopy were used to test three nanomaterials: alumina matrix, thin-walled and thick ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Catalytic chemical vapour deposition (CCVD) is currently the most promising technique to produce carbon nanotubes (CNTs) on a specific site as well as on a large-scale. Here, we review our recent experimental studies on CNTs grown by CCVD. The yield as wel ...
Molecular dynamics (MD) simulations under transverse shear, uniaxial compression, and pullout loading configurations are reported for multiwall carbon nanotubes (MWCNTs) with different fraction of interwall sp(3) bonds. The interwall shear coupling in MWCN ...
Mechanical and fracture behaviors of wood are defined by the morphology and mechanical properties of wood fibers and their bonding medium. Parallel orientation of wood fibers makes them the most influential microstructural elements from the mechanical poin ...
The effect of different curing temperatures (from 20 to 40 °C) on the compressive strength and hydration of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) have been investigated between 3 and 28 days, using the loss on ignition test (LOI) and th ...
The microstructure and tensile behavior of pure single crystalline Ni irradiated to low doses at room temperature with 590 MeV protons are investigated. Tensile tests performed at room temperature show radiation induced hardening, which increases with incr ...
The potential of pulp fiberreinforced thermoplastics is currently not fully explored in composites. One of the main reasons is that pulp fibers are extracted for the use in papermaking and are thus not optimized for use as reinforcements in thermoplastics ...
