Autogenous Shrinkage and Hydration Kinetics of SH-UHPFRC under Moderate to Low Temperature Curing Conditions
Related publications (204)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Wood/timber has been widely used for house and bridge construction. It is a widely available natural material that necessitates low energy for the production, following simple processes. The environmentally friendliness, together with the low cost of raw m ...
One of the most important characteristics of load-bearing structures is ductility, i.e. the ability of a material or a structure to sustain inelastic deformation prior to failure, without loss of resistance. The topic of this PhD Thesis was to develop duct ...
In this paper, the replacement of high cost silica fume with calcined clay was investigated in UHPFRC mixes. The impact of two grades of calcined clay on the hydration and microstructural development of UHPFRC matrices was investigated, where 54% of the ce ...
Ultra-High Performance Fiber Reinforced Concretes (UHPFRC) have demonstrated their potential to contain the explosion of maintenance costs (Economy and Environment) for civil engineering structures, due to their extremely low permeability associated with t ...
We have conducted discrete element simulations (PFC3D) of very loose, cohesive, granular assemblies with initial configurations which are drawn from Baxter's sticky hard sphere (SHS) ensemble. The SHS model is employed as a promising auxiliary means to ind ...
Geomechanical stability issues may arise due to induced thermal stresses because CO2 will generally reach the storage formation at a temperature lower than that of the reservoir. Cold injection will form a cold region around the injection well, which will ...
A naturally buckling brace (NBB) is a steel brace that consists of a high-strength and low-yielding steel channel arranged in parallel with eccentricity acting along the brace length. To enhance the feasibility of NBB fabrication, three connecting design d ...
The phase assemblage of binary Portland cements with 45 wt% replacement by calcareous fly ash and slag has been investigated by experiment, mass balance and thermodynamic simulations. The input for these calculations was based on clinker reaction measured ...
Wood/timber has been widely used for house and bridge construction. It is a widely available natural material that necessitates low energy for the production, following simple processes. The environmentally friendliness, together with the low cost of raw m ...
Concrete-filled steel tube (CFT) columns offer significant advantages over columns made of either steel or concrete alone, such as large energy dissipation and increased strength and stiffness. To further improve the seismic performance of these columns, a ...