A portable lab-on-a-chip instrument based on MCE with dual topbottom capacitive coupled contactless conductivity detector in replaceable cell cartridge
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The term of optofluidics defines an emergent research field that combines microfluidics and optics. In many lab-on-a-chip applications, these two technologies are used in combining the microfluidics for sample delivery and optics for sensing and controllin ...
Here we present an electrical lysis throughput of 600 microliters per minute at high cell density (108 yeast cells per ml) with 90% efficiency, thus improving the current common throughput of one microliter per minute. We also demonstrate the extraction of ...
This study adds a new dimension to lab-on-a-chip systems by employing three-dimensional (3D) integration technology for improved performance, higher functionality, and on-chip computational power. Despite the extensive amount of current research on 3D memo ...
We present a novel optical technique for simultaneously measuring the absorbance and the refractive index of a thin film using an infrared optofluidic probe. Experiments were carried on two different liquids and the results agree with the bibliographical d ...
The key factor in widespread adoption of Radio Frequency Identification (RFID) technology is tag cost minimization. This paper presents the first low-cost, ultra-low power, passive RFID tag, fully integrated on a single substrate in a standard CMOS process ...
Institute of Electrical and Electronics Engineers2014
An integrated chip for DNA hybridization detection was realized in a standard CMOS process: it hosts 80 biosensors subdivided in 2 channels, as well as D/A and A/D converters for electrical stimulation and readout. A microfluidic system, bonded on the surf ...
The objective of this PhD thesis is the development of a microfluidic platform for the real-time measurements of the mechanical properties of biological analytes at the single entity level.The systems developed for these purposes consist of piezoelectrical ...
This paper describes a reproducible method for μm precision alignment of polydimethylsiloxane (PDMS) microchannels with coplanar electrodes using a conventional mask aligner for lab-on-a-chip applications. It is based on the use of a silicon mold in combin ...
Matching the scale of microfluidic flow systems with that of microelectronic chips for realizing monolithically integrated systems still needs to be accomplished. However, this is appealing only if such re-scaling does not compromise the fluidic throughput ...
Pressure lies at the basis of operation of most microfluidic systems, and is a determinant factor in the extent of miniaturization and in limiting the throughput and time constant of the microfluidic assays. Despite the apparent importance given to fluidic ...
