Photo-polymerized epoxy primer for adhesion improvement at thermoplastics/metallic wires interfaces
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Three-dimensional thermo-mechanical stress analysis of composite joints with bi-adhesive bonding is presented using the full layerwise theory. Based on three-dimensional elasticity theory, sets of fully coupled governing differential equations are derived ...
In this work, resins based on diglycidyl ether of bisphenol A (DGEBA) epoxy and a latent hardener, dicyandiamide (DICY), as well as carbon fiber (CF) composites based on them, were prepared with three commercial accelerators: a methylene bis (phenyl dimeth ...
Single crystals of ferromagnetic shape memory alloys (MSMA) exhibit magnetic field and stress induced strains via energy dissipating twinning. Embedding single crystalline MSMA particles into a polymer matrix could thus produce composites with enhanced ene ...
Self-healing materials are a novel class of materials able to repair structural or, more generally, functional damage to a part. They hence have the potential to improve reliability and cost effectiveness, because failure or loss of functionality may be po ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
The feasibility of self-healing epoxy matrices using the same chemistry as the matrix material, namely a standard epoxy-amine system, is demonstrated. The two-component self-healing system is encapsulated in core-shell structures using standard in situ cur ...
This work addresses the development of composite materials that contain metallic load-bearing cords with the aim of combining outstanding mechanical performance with added functionality, including electrical conductivity, data transmission, and temperature ...
The mechanical and damping properties of unidirectional (UD) and twill 2/2 flax fibre (FF) reinforced thermoset (epoxy) and thermoplastic (polypropylene (PP) and polylactic acid (PLA)) composites containing 40 vol% of fibres have been compared with those o ...
We report results on the development of an innovative fast-curing coupling method using a UV-curable epoxy primer based on a cycloaliphatic di-epoxide resin. The materials to bond are metallic wires and a thermoplastic polyurethane matrix. The curing kinet ...
In continuous composite production, for example the continuous impregnation of steel wires or cords with a thermoplastic polyurethane matrix, an ideal and cost-effective solution to improve interfacial adhesion and durability would be to deposit and cure a ...
