Recrystallization and grain boundary formation in an 18-carat gold alloy studied by mechanical spectroscopy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Mechanical loss measurements were performed at high temperature in fine-grained ceramics, such as zirconia and alumina. At high temperature, the mechanical loss increases exponentially with temperature, which accounts for material creep. The results are an ...
Magnesium matrix composites made of pure (99.98%) magnesium reinforced with long carbon (Mg/C) and stainless steel (Mg/steel) fibers were processed by low pressure infiltration method. Mg/C composites were then oriented from the crystallographic point of v ...
We construct an approximate analytic expression for the growth of the neck between two sintering roughened crystals in contact with a melt. The result combines recent work on early phase sintering [R.S. Farr, M.J. Izzard, Phys. Rev. E 77 (2008) 041608], an ...
everal SrTiO3 (STO) thin films without electrodes processed by pulsed laser deposition, of thicknesses down to 40 nm, were studied using infrared transmission and reflection spectroscopy. The complex dielectric responses of polar phonon modes, particularly ...
Polycrystalline zirconia (3Y-TZP grade) unreinforced and reinforced with multiwalled carbon nanotubes (CNTs) or silicon carbide whiskers (SiCw) or silicon carbide particles (SiCp) have been processed and studied by mechanical spectroscopy with complementar ...
Two important factors affecting hot tearing - semi-solid constitutive behaviour and grain percolation - have been simulated through the use of microstructure models based on granular structures. The semi-solid model geometry is based on a modified Voronoi ...
The exact mechanism of creep resistance enhancement due to yttrium (Y) doping in a-alumina is still subject to speculation, although it is known that dopants segregate strongly to grain boundaries. The current work applies atomistic simulation techniques t ...
High temperature plasticity of fine-grained ceramics (ZrO2, Al2O3, etc) is usually associated with a grain boundary sliding process. The aim of the present research is then to improve the high-temperature mechanical strength of polycrystalline zirconia (3Y ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2008
Polycrystalline zirconia (3Y-TZP grade) specimens unreinforced and reinforced with multiwalled carbon nanotubes (MWCNTs) or silicon carbide whiskers (SiCws) were processed by powder metallurgy and studied by mechanical spectroscopy. The high-temperature me ...
Selection of α variants is often reported in thermomechanically processed titanium alloys. Many workers have noticed that α variants are frequently situated at the grain boundary between β grains that share a common {1 1 0}β plane, but up to now such coinc ...
