Experimental Validation of 3-D Reconstructed Pin Power Distributions in Full-Scale BWR Fuel Assemblies with Partial-Length Rods
Related publications (74)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The present doctoral research aims at the appraisal of nodal core simulators used for the calculation of commercial boiling water reactor (BWR) cores, against measurements carried out at the Paul Scherrer Institute under the LWR-PROTEUS experimental progra ...
A new method to predict the entrained liquid fraction in annular two-phase flow is presented. The underlying experimental database contains 2460 data points collected from 38 different literature studies for 8 different gas-liquid or vapor-liquid combinati ...
After the first high power D-T experiment in JET in 1997 (DTE1), when JET was equipped with Carbon PFC's, a proposed second high power (up to similar to 40MW) D-T campaign (DTE2) in the current Be/W vessel will address essential operational, technical, dia ...
Reaction rate distribution measurements are reported from experiments in an SCWR-like test lattice performed with separated moderator and coolant regions. This work was done at the zero-power research reactor PROTEUS at the Paul Scherrer Institute in Switz ...
The Supercritical-Water-Cooled Reactor (SCWR) is the Generation IV reactor concept most closely related to current light water reactors (LWRs). The SCWR builds on the vast experience with today's LWRs and supercritical coal-fired power plants. Water at sup ...
Nuclear power is nowadays in the front rank as regards helping to meet the growing worldwide energy demand while avoiding an excessive increase in greenhouse gas emissions. However, the operating nuclear power plants are mainly thermal-neutron reactors and ...
In order to meet the steadily increasing worldwide energy demand, nuclear power is expected to continue playing a key role in electricity production. Currently, the large majority of nuclear power plants are operated with thermal-neutron spectra and need r ...
Microstructured reactors (MSR) with characteristic dimensions below 100 μm are warranted to maintain close to isothermal conditions when carrying out quasi-instantaneous highly exothermic reactions. Unfortunately, such small dimensions increase the risk of ...
In recent years, higher discharge burn-ups and initial fuel enrichments have led to more and more heterogeneous core configurations in light water reactors (LWRs), especially at the beginning of cycle when fresh fuel assemblies are loaded next to highly bu ...
CROCUS is a zero power (100 W) reactor of the Laboratory for Reactor Physics and Systems Behavior (LRS) at the Swiss Federal Institute of Technology, Lausanne (EPFL). It is used for teaching and research purposes. Its modeling has relied so far on diffusio ...