Dc bus utilisation in multiphase VSI supplied drives with a composite stator phase number
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Application of power electronics in variable speed electric drives enables utilization of ac machines with a phase number higher than three. It then becomes possible to use the additional degrees of freedom, available in multi-phase systems, to control oth ...
This paper deals with the determination of large synchronous machine characteristic quantities using an extended 2D-finite element method and based on the knowledge of the geometry and of the physical properties of the electrical and magnetic circuits of t ...
Recent research has shown that it is possible to independently control two three-phase induction machines while supplying them via a single five-leg voltage source inverter (VSI). In such a two-motor drive system one phase of each motor is connected to a c ...
In recent years the use of solid state frequency converters is rapidly increasing in the industrial and power plants where electric machines are installed, since it allows variable speed operations for the electric system, thus becoming a key factor which ...
Six-phase a.c. motor drives are usually supplied from two-level six-phase voltage source inverters (VSIs), which are controlled using appropriate PWM techniques. Most of the existing work applies to the asymmetrical six-phase VSI, supplying an asymmetrical ...
Rotor flux oriented control of multiphase induction machines with sinusoidal MMF distribution can theoretically be realized by using only two current controllers in the synchronous reference frame. In practice however this is inadequate, as shown in the pa ...
Multiphase variable-speed drives, supplied from two-level voltage-source inverters (VSIs), are nowadays considered for various industrial applications. Depending on the drive structure and/or the motor design, the VSI is required to generate either sinusoi ...
Institute of Electrical and Electronics Engineers2008
This paper proposes, for the first time, the investigation of the SG-FET small slope switch based on a hybrid numerical simulation approach combining ANSYS (TM) Multiphysics and ISE-DESSIS (TM) in a self-consistent system. The proposed hybrid numerical sim ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007
This paper presents a combined analytical and finite-element (FE) method for computation of the no-load voltage waveform of laminated salient-pole synchronous generators. The described method takes into account saturation effects as well as the damper bar ...
Multi-phase motor drives are typically supplied from two-level voltage source inverters (VSIs). It is thus necessary to develop pulse width modulation (PWM) schemes for inverter control in order to utilise the benefits offered by multiphase motor drives. T ...
