Spectral reflection and dot surface prediction models for color halftone prints

Related publications (30)

About
Privacy
Disclaimer

Graph Chatbot

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

The authors report the fabrication and characterization of chemiresistive sensors, composed of a thermoplastic elastomer (TPE), styrene‐ethylene‐ran‐butylene‐styrene, and a high‐structure carbon black (CB) targeted for detecting hydrocarbons at or near roo ...

Wiley2020

Dimensional scaling of high-speed printed organic transistors enabling high-frequency operation

Vivek Subramanian

Printed electronics has promised to deliver low-cost, large-area and flexible electronics for mass-market applications for some time; however, so far one limiting factor has been device performance. Over the last decade, great progress has been made in ter ...

IOP PUBLISHING LTD2020

Effects of multiple scattering on angle-independent structural color in disordered colloidal materials

Sofia Magkiriadou

Disordered packings of colloidal spheres show angle-independent structural color when the particles are on the scale of the wavelength of visible light. Previous work has shown that the positions of the peaks in the reflectance spectra can be predicted acc ...

AMER PHYSICAL SOC2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

Precise and accurate image-based measurements of optical material properties

Marjan Shahpaski

The appearance of objects is governed by how they reflect, transmit and absorb the light they receive. That, in turn, depends on the material's internal structure, surface structure, and viewing and illumination directions. Changes in those characteristics ...

EPFL2020

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Frank Nüesch, René Uwe Schneider, Jakob Heier

In this paper, some practical issues related to the manufacturing, and design criteria related to the application in devices of a hybrid silver grid/poly (3,4-ethylenedioxythiophene) semi-transparent electrode are discussed. The electrodes are fabricated b ...

SPRINGER LONDON LTD2019

Implementation of Functional Microfluidic Dispensing Tools Enabling Enhanced Control in Extrusion Bioprinting

Ludovic Serex

Inspired from additive manufacturing's success, the structuring of biocompatible materials through bioprinting has become a growing field of research in the past fifteen years. It opened the door to a plethora of applications ranging from the fabrication o ...

EPFL2019

Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substrate

Roger Hersch, Lin Yang, Petar Pjanic

Under specular reflection, non-isotropic halftones such as line halftones printed on an ink-receiving plastic layer superposed with a metallic layer change their colors upon in-plane rotation of the print. This color change is due to the orientation-depend ...

I S & T-SOC IMAGING SCIENCE TECHNOLOGY2019

Inkjet Printed Carbon Nanotube Electrodes for Measuring Pyocyaninand Uric Acid in a Wound Fluid Simulant and Culture Media

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

Polyacrylamide-coated, carbon nanotube (PA/CNT)electrodes were prepared by an ink-jet printing process and used to measure pyocyanin and uric acid in a wound fluid simulant at 37 oC.These two moleculesare potential indicators of infection and therefore the ...

2019

Inkjet printing and electrocatalysis

Victor Costa Bassetto

The transition in energy matrix, from fossil to renewable energy sources, will require the utilization of grid levelling alternatives to cope with the intermittent characteristic of renewable energy. Advanced electrochemical energy conversion and storage d ...

EPFL2019

Page 3 of 3

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

2020

Inkjet Printed Carbon Nanotube Electrodes for Measuring Pyocyaninand Uric Acid in a Wound Fluid Simulant and Culture Media

Hubert Girault, Andreas Stephan Lesch, Milica Jovic

2019

Inkjet printing and electrocatalysis

Victor Costa Bassetto

EPFL2019