Efficient reduction of bromates using carbon nanofibre supported catalysts: Experimental and a comparative life cycle assessment study
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The main objectives of this work are 2-fold : The development of a novel type of composite material based on carbon nanofibers supported on sintered metal fibers filters (CNF/SMF) and to explore the use of this material as a catalytic support for a model r ...
Monodispersed Pd-nanoparticles (similar to 8nm) prepared via a modified microemulsion method were deposited on active carbon fibers (ACF) fabrics and studied in a semi-batch 1-hexyne liquid-phase hydrogenation. The catalyst Pd(0.45 wt%)/ACF demonstrated > ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
Internal damage in uniaxial continuous alumina fibre-reinforced aluminium is measured by acoustic emission during tensile straining in the fibre direction. Over most of the loading history spatially uncorrelated fibre fragmentation occurs, consistent with ...
The principal objective of this thesis is the development of a palladium catalyst supported on woven fabrics of activated carbon fibers (ACF) for the reactions of hydrogenations in liquid phase and the design of multiphase reactors using the characteristic ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
A novel composite material based on carbon nanofibers (CNF) grown on sintered metal fibers (SMFInconel) filter was investigated for its favorable properties as catalytic support. The CNF were formed directly over the SMFInconel by thermal (650 degrees C) c ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
The catalytic decomposition of ozone (200-1600 ppm) to molecular oxygen was investigated over activated carbons in the form of woven fibre fabrics (ACF) or granules (ACG) at room temperature. The dynamics of carbon activity was characterised by two distinc ...
A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...