Damping of thermoset and thermoplastic flax fibre composites
Related publications (96)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
New thermoplastic composites with their composition tailored at the yarn level were proposed and successfully prepared. A specific processing method was developed for composites exhibiting different fibre and porosity concentration gradients. Mechanical pr ...
This paper reports on a newly developed anti-sticking resin obtained by mixing a fluorine-containing monomer (F- monomer) for UV nanoimprinting lithography (UV-NIL) to reduce the contact adhesion force during the demolding process. The new resin system sho ...
The present work aims to enhance the interlaminar toughness of carbon/epoxy composites produced by RTM by modifying the resin with hyperbranched polymers (HBPs). A HBP content of 7.5% in the resin was selected as the best compromise between a slight loss i ...
In liquid composite moulding, capillary phenomena take place as the fibre/air interface is progressively replaced by the fibre/resin interface. These effects are often neglected when computing the flow front progression into the fibre preform, because the ...
Temperature-dependent material properties of glass fiber-reinforced polymer composites were derived from tests performed on the material itself, from references concerned with similar polymer materials and from observations during full-scale fire experimen ...
A technique is presented to measure the capillary pressure drop DPg during infiltration of non-crimp fabrics by a liquid matrix. Three types of liquids are used: polyethylene glycol (PEG) dissolved in water, a thermoset epoxy resin and a reactive thermopla ...
A new model is proposed to estimate the post-fire stiffness of FRP composites after different fire-exposure times. The model considers the E-modulus recovery of the material if cooled down from temperatures between glass transition and decomposition during ...
The feasibility of using a low temperature liquid composite molding technique to produce smart composites with embedded shape memory alloys was investigated. The epoxy system of EPON 828 resin and DETA hardener was evaluated, with embedded NiTiCu shape mem ...
Adhesively-bonded joints, including double- and stepped- lap joints (DLJs and SLJs), were experimentally investigated under cyclic tensile loading. The joints were composed of pultruded GFRP laminates and epoxy adhesive. A critical stiffness was found for ...