Failure of Ceramic Composites in Non-Uniform Stress Fields
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents a plastic hinge modelling approach for wall-type bridge piers with detailing deficiencies such as low transverse reinforcement ratios and lap splices in potential plastic hinge regions. Currently available plastic hinge length estimates ...
Experiments and finite element simulations have been carried out to assess the warm pre-stressing effects on the effective fracture toughness of the high-chromium reduced activation tempered martensitic steel Eurofer97. The experiments have been conducted ...
In this paper, a combined experimental-numerical based work was undertaken to investigate the Bragg wavelength shift response of an embedded FBG sensor when subjected to different conditions of multi-axial loading (deformation). The following cases are exa ...
Self-healing materials are a novel class of materials able to repair structural or, more generally, functional damage to a part. They hence have the potential to improve reliability and cost effectiveness, because failure or loss of functionality may be po ...
The purpose of this review is to present the state-of-the-art in dynamic fracture testing methods and fracture behaviour of rock materials. The review begins by briefly introducing the history of rock dynamic fracture and explaining the significance of stu ...
Bridging by intact fibers is an important toughening mechanism in composite materials. However, a direct experimental evaluation of its contribution is difficult to achieve and in the case of large scale bridging the thickness, h, may have an important inf ...
Steel tubular truss are lightweight, aesthetical and used in many different applications. These structures are sensitive to fatigue and specific verification methods have been developed for them, in particular by CIDECT [2001]. Due to assembly and welding, ...
Tantalum and hafnium carbides are classified as Ultra High Temperature Ceramics (UHTC) because of their extreme melting temperatures (above 3900 degrees C). Therefore, these materials can safely operate in the range of temperature that any other materials ...
As a second part of this series, the present study also addresses the water resistance of joints obtained by friction welding. Here, the mode II fracture is in focus, that is, 4-points end-notched flexure specimens (4-ENF) were investigated with various mo ...
The edge strength of glass is affected by the load history. To quantify this effect, 12 series of glass specimens were subjected to either linearly increased (reference value), constant or cyclic loading. For constant loading the experimental values could ...
