Engineering size-scaling of plastic deformation in nanoscale asperities
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Small volume deformation can produce two types of plastic instability events. The first involves dislocation nucleation as a dislocation by dislocation event and occurs in nanoparticles or bulk single crystals deformed by atomic force microscopy or small n ...
Irradiation is known to lead to a degradation of the mechanical properties of materials. This is particularly crucial in the case of materials that will be used in the future thermonuclear fusion reactor, where extremely high irradiation doses are expected ...
The microstructural characterization of two titanium alloys, Ti5Al2.5Sn and Ti6Al4V, was performed. These alloys were selected as representatives of the alpha and alpha + beta titanium families, to investigate their possible application as structural mater ...
Plastic deformation of Al-Pd-Mn icosahedral quasicrystals has been achieved at room temperature using a high-confining-pressure medium. The deformation microstructure, investigated by transmission electron microscopy, is characterized by long straight band ...
The deformation mechanisms of silicon {001} surfaces during nanoscratching were found to depend strongly on the loading conditions. Nanoscratches with increasing load were performed at 2 μm/s (low velocity) and 100 μm/s (high velocity). The load-penetratio ...
The deformed microstructures of both irradiated and unirradiated Fe-9%Cr (Fe-9Cr) uniaxial tensile specimens have been examined to identify controlling mechanisms. Deformation following irradiation is found to occur in poorly defined channels about 100 nm ...
The dislocation structures resulting from compression tests on Ni-3 (Al, I-If) single crystals are studied as a function of the deformation temperature between 77 and 900 K. Mechanical parameters are also reported, such as the 0.2% offset stress, the work- ...
The introduction of new packages as well as the ongoing miniaturization in SMT make the evaluation of the reliability of solder joints a permanent task. Passive thermal cycling is an important test to evaluate the lifetime of solder joints. However, tin-le ...
The author studies properties of the Bordoni peak in 99,999 % gold. The following features are considered : influence of type and rate of coldwork on relaxation strength. After traction coldwork, the height of the Bordoni peak is roughly proportional to th ...
A new approach for human skin modeling and deformation based on cross-sectional methods is presented. Internally, the authors use dynamic trimmed parametric patches for describing the smooth deformation of skin pieces; then they polygonalize parametric pat ...
