Life prediction of titanium MMCs under low-cycle fatigue
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The hydrothermal ageing of glass/epoxy interface is investigated using an experimental numerical approach on cylindrical epoxy specimens with centrally located optical fibers. A 24 mm long Bragg grating sensor is inscribed on the optical fiber and used to ...
We review the development of virtual tests for high-temperature ceramic matrix composites with textile reinforcement. Success hinges on understanding the relationship between the microstructure of continuous-fiber composites, including its stochastic varia ...
The tensile fatigue behaviour of ultra-high performance fibre reinforced concrete (UHPFRC) under constant amplitude fatigue cycles is presented. Three series of uniaxial tensile fatigue tests up to a maximum of 10 million cycles were conducted with the obj ...
The majority of fatigue strengthening studies focus on reducing propagation rates of existing cracks, ignoring the crack initiation stage. Many existing metallic bridge members however do not contain existing cracks, but rather are nearing their design fat ...
Different failure criteria used to prevent fatigue crack initiation in metallic members are described. A series of closed-form analytical solutions were developed to predict the fatigue resistance of metallic beams after strengthening with carbon fiber-rei ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
A number of construction engineering applications for textiles made of composite materials are presented in this chapter. All these structures were fabricated by connecting several subcomponents, usually by using adhesives. Although composite materials are ...
A finite element study of MWCNT pullout from a ceramic matrix with a rough fibre-matrix interface is presented. MWCNT pullout differs in several ways from pullout of solid, micro-scale fibres, and has not been studied before. Interfacial roughness, due to ...
The fatigue behavior of adhesively-bonded glass fiber-reinforced polymer (GFRP) joints is affected by the loading sequence. Analysis of several experimental data for composite materials and adhesively-bonded composite joints showed that the loading sequenc ...
We present a methodology for determining stress distributions ahead of blunt notches in plates of fiber-reinforced ceramic–matrix composites subject to uniaxial tensile loading, accounting for the effects of inelastic straining due to matrix cracking. The ...
