Mechanical behavior of glass and Blackglas(R) ceramic matrix composites
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Particle reinforced metal matrix composites are manufactured by high-pressure infiltration. These composites contain roughly 50% by volume of discrete alumina inclusions dispersed homogeneously in a continuous aluminium-based matrix. Three matrices, namely ...
The correlation between sizing formulation, bundle mechanical characteristics, and bundle-matrix static and dynamic interactions are investigated. Two glass-fiber sizing formulations are considered, one containing polyvinyl acetate (PVAc) and the other pol ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
Particle Reinforced Metal Matrix Composites (PRMMCs) are produced by high-pressure infiltration of ceramic particle beds. Matrix materials are either pure Al or Al-4,5%Cu, and the reinforcement is made either of angular or of polygonal alumina particles. T ...
The effect of sizing on bending rigidity in fibre bundles was investigated. Particular attention was paid to the effect of film formers and anti-static agents on the behaviour of glass fibre bundles under forced packing conditions. The bending rigidity of ...
The use of variable-focal-length (VFL) microlenses can provide a way to axially scan the foci across a sample by electronic control. We demonstrate an approach to coupling VFL microlenses individually to a fiber bundle as a way to create a high-throughput ...
A micromechanically based model for the deformation, strength, and stress-rupture life of a ceramic-matrix composite is developed for materials that do not degrade by oxidative attack. The rupture model for a unidirectional composite incorporates fiber-str ...
In this study, two samples of multiwalled carbon nanotubes (MWNT) were synthesized by CVD of acetylene over Fe2Co catalysts supported by CaCO3 using different temperatures. The material produced at 660 °C (MWNT600) shows slightly better performance as evid ...
