Modeling of mechanical damage detection in CFRPs via electrical resistance
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The present research represents a theoretical and experimental contribution to the understanding of the structural behaviour of elements made of ultra-high performance fibre-reinforced concrete (UHPFRC). UHPFRC is investigated as an advanced cementitious m ...
A partially embedded long fibre-Bragg grating (FBG) into an epoxy cylindrical specimen is used to monitor the strain distribution evolution along its axis when subjected to subsequent cycles of thermal ageing at 70 and 110 degrees C. Assuming a total volum ...
Composite materials are increasingly used in high volume automotive applications, usually as a replacement for assemblies of multiple metallic parts such as stamped and spot-welded steel sheets. One of the motivations is to reduce tooling and assembly cost ...
Homogeneous plane strain compression tests were performed on standard industrial GMT composites using a channel mould at 200oC. A charring and weighting technique was used to determine the fibre concentration after the compression experiments. Experimental ...
New Road Construction Concepts (NR2C) is a FEHRL-project supported by the European Commission under the Sixth Framework Programme. NR2C develops perspectives and specific innovations, so that long-term visions are linked to short-term action. One of the id ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
In this study, two samples of multiwalled carbon nanotubes (MWNT) were synthesized by CVD of acetylene over Fe2Co catalysts supported by CaCO3 using different temperatures. The material produced at 660 °C (MWNT600) shows slightly better performance as evid ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
