Multiscale modeling of ductile-fiber-reinforced composites
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A model for predicting composite material strength degradation under elevated and high temperatures is proposed. This model is based on the morphology of the mixture of materials in different states. The degradation of resin-dominated shear strength can be ...
Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)is charact erized by aunique combination of extremely low permeability, high strength and deformability. Extensive R&D works and applications over the last 10 years have demonstrated that cast on sit ...
A statistical model for fracture of aligned-whisker-reinforced metals was used to interpret tensile data of a TiB-reinforced titanium alloy. From this analysis, a TiB whisker strength of 8.0 GPa with a Weibull modulus of 2 was predicted. The analysis is co ...
Toughness in Ceramic Matrix Composites (CMCs) is achieved if crack deflection can occur at the fiber/matrix interface, preventing crack penetration into the fiber and enabling energy-dissipating fiber pullout. To investigate toughening in nanoscale CMCs, d ...
Nanofibers used in current ceramic matrix composites (CMCs) are usually wavy and of finite length. Here, a shear-lag model for predicting the tensile strength and work of fracture of a composite containing a "single matrix crack", as a function of all the ...
Carbon nanotubes (CNTs) are grown on PAN-based carbon fibers by means of catalytic chemical vapor deposition technique. By using catalytic thermal decomposition of hydrocarbon, CNTs can be grown in the temperature range of 650750 degrees C. However, carbon ...
The extremely low permeability of Ultra-High Performance Fibre Reinforced Concretes (UHPFRC)associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected t ...
Internal damage in uniaxial continuous alumina fibre-reinforced aluminium is measured by acoustic emission during tensile straining in the fibre direction. Over most of the loading history spatially uncorrelated fibre fragmentation occurs, consistent with ...
We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...