Plastic deformation mechanisms in nanocrystalline columnar grain structures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Hot tearing, a severe defect occurring during solidification, is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of an insufficient liquid feeding to compensate for the volumetric change. In ...
Single crystal copper was irradiated with 590 MeV protons to a dose of 0.01 dpa at room temperature. Irradiated and unirradiated tensile samples were deformed and relaxation tests were performed at temperatures between 77 and 293 K. The tests show a strong ...
Raman microscopy is applied to a gel-spun UHMWPE-fibre (Dyneema SK60) to determine the distribution of axial molecular stresses and their change with time (in creep and during stress relaxation). A more detailed method is proposed to quantify the observed ...
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
Room temperature investigations on the shear stress and deformation mechanisms of (Mg0.9Fe0.1)SiO3 perovskite are performed in situ up to 32 GPa using radial X-ray diffraction and the diamond anvil cell as a deformation apparatus. The uniaxial stress suppo ...
Phase contrast radiology using unmonochromatic synchrotron X-ray successfully imaged the grain boundaries of Al and AlZn alloy without contrast agent. Combining the high penetration of X-ray and the possibility of 3D reconstruction by tomorgraphy or stereo ...
The mechanical properties of extruded films of isotactic polypropylene (iPP) and ethylene-propylene rubber toughened iPP (iPP/EPR) have been analyzed in terms of the specific essential and non-essential work of fracture using high speed tensile test appara ...
The effect of the bulk microstructure (grain size distribution, grain boundary length) on the oxygen transport properties of permeation membranes is investigated in this work. For this purpose, La0.5Sr0.5FeO3-? samples with different microstructures have b ...
AlPdMn quasi-crystalline specimens were deformed at low temperatures using a high-confining-pressure device. The microstructures, observed in each sample by transmission electron microscopy, depend on the deformation temperature and show that plastic defor ...
