Tensile strength of fiber-reinforced composites: II. Application to polymer matrix composites
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
The present study investigates the origin of voids in sheet molding compounds (SMCs) sheets and their transport during the manufacturing steps. Paste mixing, impregnation, thickening, and molding have been performed with five different SMC sheets, one with ...
Temperature-dependent material properties of glass fiber-reinforced polymer composites were derived from tests performed on the material itself, from references concerned with similar polymer materials and from observations during full-scale fire experimen ...
A computational analysis of the longitudinal deformation of continuous fibre reinforced metals is presented. Elastic and elastic-plastic matrix behaviour are considered. Analytical approaches are confronted with finite element analyses (FEA) for varying fi ...
In this study, two samples of multiwalled carbon nanotubes (MWNT) were synthesized by CVD of acetylene over Fe2Co catalysts supported by CaCO3 using different temperatures. The material produced at 660 °C (MWNT600) shows slightly better performance as evid ...
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
The effect of different curing temperatures (from 20 to 40 °C) on the compressive strength and hydration of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) have been investigated between 3 and 28 days, using the loss on ignition test (LOI) and th ...
During reheating and post-processing of thermoplastic-based composites, deconsolidation is often observed: the volume fraction fibre decreases and the void content increases. In this article, the phenomena leading to deconsolidation are investigated, with ...
A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the ...
The present work aims to enhance the interlaminar toughness of carbon/epoxy composites produced by RTM by modifying the resin with hyperbranched polymers (HBPs). A HBP content of 7.5% in the resin was selected as the best compromise between a slight loss i ...
