Evidence of anti-coking behavior of La 0.8Sr 0.2Cr 0.98Ru 0.02O 3 as potential anode material for Solid Oxide Fuel Cells directly fed under methane
Related publications (44)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The main aim of this dissertation is to study the catalytic aspects of very small transition metal clusters supported on h-BN/Rh(111). The catalytic reactions of interest were ammonia synthesis and CO oxidation on mass selected and soft landed iron and pla ...
In searching for a suitable semiconductor material for hydrogen production via photoelectrochemical water splitting, alpha-Fe2O3 received significant attention as a promising photoanode due to its band gap (similar to 2.1 eV), good stability, low cost, and ...
The industrial production of aromatic amines, essential intermediates for the synthesis of several drugs, dyes, pigments and agrochemicals, requires the use of heterogeneous catalysis. These molecules were formerly produced by the Béchamp reduction, a non- ...
Pure Magneli Ti4O7 nanotube arrays (NTA) were successfully fabricated by reducing TiO2 NTA with hydrogen at 850 degrees C for 30 minutes. The microstructure, composition and electrochemical behavior of the prepared Ti4O7 NTA were characterized by means of ...
Hydrogen holds the potential to be an alternative to replace fossil fuels in the future. The tremendous research effort dedicated to the issue of hydrogen storage has led to considerable advancements in the development of both adsorption materials and chem ...
A temperature programmed treatment of MoO3 in flowing N-2 + H-2 has been employed to prepare beta-phase molybdenum nitride (beta-Mo2N) which has been used to promote, for the first time, the catalytic hydrogenation of p-chloronitrobenzene. The reduction/ni ...
Metal organic supramolecular chemistry on surfaces has matured to a point where its underlying growth mechanisms are well understood and structures of defined coordination environments of metal atoms can be synthesized in a controlled and reproducible proc ...
Miniaturized, low temperature Solid Oxide Fuel Cells (SOFCs) that operate below 600 °C are promising for supplying electrical power to portable devices. Thin electrolyte membranes of less than one micrometer thickness have been shown to yield reasonable po ...
Bio synthetic natural gas (Bio-SNG) is being proposed as an alternative to the natural gas of fossil origin (NG) [1]. Bio-SNG consists mainly of CH4 (at least 95%mol), has a high heating value (e.g. 10 kWh/m3N), and respects the quality standards of the NG ...
The energy efficiency of an industrial hydrogen production process using steam methane reforming (SMR) combined with the water gas shift reaction (WGS) is analyzed using process integration techniques based on heat cascade calculation and pinch analysis wi ...