Effect of SiO2 binder on the precipitation state of an AlCu4Mg1Ag/Saffil composite
Related publications (43)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Composite material combining: - a precious metal or an alloy containing a precious metal, - and a boron-based ceramic having a melting point above that of said precious metal and a density at most equal to 4 g/cm3. ...
The present study investigated the role of alloy microstructure and surface roughness on wear and friction behavior of leaded and unleaded tin bronzes. Ball-on-disk experiments were carried out under dry conditions with steel balls sliding against bronze d ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
The main aim of this work was to study and understand the influence of SiC particles on the corrosion and tribocorrosion of Al-matrix composite materials. For that, Al-SiCp functionally graded composites were produced by centrifugal casting and different S ...
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...
A W-2Y(2)O(3) composite has been developed by powder metallurgy methods in collaboration with the Plansee Company (Austria). The microstructure of the composite was analyzed using transmission electron microscopy and electron backscatter diffraction in sca ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...
Nanofibers used in current ceramic matrix composites (CMCs) are usually wavy and of finite length. Here, a shear-lag model for predicting the tensile strength and work of fracture of a composite containing a "single matrix crack", as a function of all the ...