Publication

Issues in modelling of advanced heterogeneous ceramics

Related publications (34)

Polymer derived silicon oxycarbide ceramic monoliths: Microstructure development and associated materials properties

Demetri Psaltis, Nicola Casati, Giulia Panusa, Eirini Kakkava

Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...

ELSEVIER SCI LTD2018

PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science

Anirudh Raju Natarajan, Zhouji Huang, Zheng Wang, Lin Qi

The Center for Predictive Integrated Structural Materials Science (PRISMS Center) is creating a unique framework for accelerated predictive materials science and rapid insertion of the latest scientific knowledge into next-generation ICME tools. There are ...

Springer Nature2018

Probing the micromechanical strength of oxide ceramic composite reinforcements

Václav Pejchal

This work shows how one can probe the micromechanical strength of ceramic reinforcements used in metal matrix composites, which greatly influences the mechanical performance of the composite material yet has seldom been quantified with precision. More spec ...

EPFL2017

Strong particles in Metal

Andreas Mortensen, Marco Cantoni, Goran Zagar, Raphaël Charvet, Cyril Dénéréaz, Martin Guillermo Mueller, Václav Pejchal, Marta Fornabaio, Lionel Michelet, Willy Dufour

We all know that strong fibers make most of today¹s composite materials what they are : exceptionally stiff, strong, light and tough materials that serve in a number of demanding structural applications. This presentation will try to make the case for stro ...

2016

Self-Replenishing, Wear-Resistant and Anti-Sticking Surfaces Based on Liquid Impregnation of Microstructured Mesoporous α-AI₂O₃ [Alpha Alumina] Matrices

Sriharitha Rowthu

Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...

EPFL2016

Dynamic crack propagation in a heterogeneous ceramic microstructure, insights from a cohesive model

Seyedeh Mohadeseh Taheri Mousavi

Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...

EPFL2015

Reactive friction stir processing of AA 5052-TiO2 nanocomposite: process-microstructure-mechanical characteristics

Friction stir processing (FSP) is a solid state route with a capacity of preparing fine grained nanocomposites from metal sheets. In this work, we employed this process to finely distribute TiO2 nanoparticles throughout an Al-Mg alloy, aiming to enhance me ...

Maney Publishing2015

Surface 3D Micro Free Forms: Multifunctional Microstructured Mesoporous alpha-Alumina by in Situ Slip Casting Using Excimer Laser Ablated Polycarbonate Molds

Paul Bowen, Patrik Willi Hoffmann, Sriharitha Rowthu

Ceramic surface microstructuring is a rapidly growing field with a variety of applications in tribology, wetting, biology, and so on. However, there are limitations to large-area microstructuring and fabrication of three-dimensional (3D) micro free forms. ...

Amer Chemical Soc2015

The local strength of microscopic alumina reinforcements

Andreas Mortensen, Marco Cantoni, Goran Zagar, Andreas Rossoll, Martin Guillermo Mueller, Václav Pejchal

We measure, using an adaptation of a method designed for ceramic ball bearings, the local strength of a brittle second phase that serves to reinforce a metal. The method uses focused ion beam milling and a nanoindentation device, and is free of artifacts c ...

Elsevier2015

Failure of Ceramic Composites in Non-Uniform Stress Fields

Varun Parameswaran Rajan

Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...

University of California Santa Barbara2014

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.