Composition of Wide Bandgap Semiconductor Materials and Nanostructures Measured by Atom Probe Tomography and Its Dependence on the Surface Electric Field
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work presents the development of an original concept of a side pumped diode pumped crystal laser for the generation of a high power near diffraction limited beam for material processing applications such as cutting, marking and drilling. An approach b ...
A model which takes into account the main phenomena occurring during the laser-cladding process is proposed. For a given laser power, beam radius, powder jet geometry, and clad height, this model evaluates two other processing parameters, namely, the laser ...
Laser-induced CVD has been used to produce Pt lines on pyrex glass substrates by means of platinum bis(hexafluoroacetylacetonate) as precursor. The effect that writing speed has on the line geometry and resistivity was studied, as well as the influence of ...
We report on a bulk GaAlAs mirror which is used as a saturable absorber for subpicosecond pulse generation around 835 nm. The mirror consists of a 200 nm layer of bulk GaAlAs (with approximately 5% Al content) which is grown on a linear Bragg mirror and is ...
The launch of molecules from liquid surfaces in a time of flight mass spectrometer has been investigated using different sample preparation techniques, and by exposing the liquid samples to two different laser wavelengths, 337 nm from a N2 ultraviolet lase ...
The present work is part of a feasibility study to investigate the excimer laser photon-assisted thermal decompn. of anthracene at 248 nm. The principle is to combine UV photons of an appropriate light source and heat in an incinerating reactor at modest t ...
In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the ...
An argon laser is used to induce Laser Chem. Vapor Deposition (LCVD) of platinum using platinum bihexafluoroacetylacetonate as precursor. The process can be photolytic or pyrolytic depending on the laser power used. These processes are studied by recording ...
A laser-induced depostion technique is used to produce platinum interconnection lines for microelectronic applications. The influence of the laser power as well as the vapor pressure of the precursor upon the geometry, the morphol. and the line resistivity ...
Laser induced photolytic and pyrolytic deposition spots on silicon are studied for different laser powers, partial pressure and deposition time. In the photolytic case at low powers, the reaction takes place in the adsorbed phase on the surface, whereas at ...
