Diffuse light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures

The diffuse light transmittance of hand lay-up glass fiber-reinforced polymer (GFRP) laminates was investigated. Spectrophotometric experiments were performed on unidirectional and cross-ply glass fiber-reinforced polymer specimens with fiber volume fractions ranging from 0.20 to 0.45. Numerical ray-tracing analysis was used to investigate the experimentally observed wavelength dependency of the diffuse light transmittance. Refractive index mismatches between glass fibers and resin and the presence of air flaws in the laminates were the major parameters increasing light diffusion. Based on the experimental data, analytical models were developed to predict the translucency (haze) of glass fiber-reinforced polymer laminates as a function of the reinforcement weight and total light transmittance. The developed models demonstrate the feasibility of conceiving glass fiber-reinforced polymer skylights with a translucency of 0.90 and a total light transmittance of 0.50 for the daylighting of energy-efficient buildings. It is also shown that laminates with translucencies of lower than 0.30 satisfy minimum total transmittances of 0.83 as required for the encapsulation of photovoltaic cells.

Optically-derived mechanical properties of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures

Julia De Castro San Roman Fest, Thomas Keller, André Gabriel Kostro, Carlos Pascual Agullo, Andreas Schueler, Anastasios Vassilopoulos

This paper demonstrates how the translucency of glass fiber-reinforced polymer (GFRP) laminates allows the derivation of their mechanical properties through optical measurements. Spectrophotometric, goniophotometric and tensile experiments were performed on unidirectional and cross-ply hand lay-up GFRP laminates with fiber volume fractions ranging from 0.15 to 0.45. An analytical model to predict the directional fiber volume fractionsand thus the mechanical properties of GFRP laminateshas been developed based on the total and diffuse transmittance and directional light scattering of the laminates. It is demonstrated that structurally optimized GFRP laminates can meet the requirements for GFRP skylights and the encapsulation of photovoltaic cells into translucent GFRP laminates.

SAGE Publications2015

Total Light Transmittance of Glass Fiber-Reinforced Polymer Laminates for Multifunctional Load-Bearing Structures

Julia De Castro San Roman Fest, Thomas Keller, Carlos Pascual Agullo, Andreas Schueler

Glass fiber-reinforced polymer (GFRP) materials are increasingly used in building construction for the design of multifunctional structures. These composite materials allow the integration of structural functions, building physics functions (mainly thermal insulation) and architectural functions (complex forms and color) in single large-scale building components. GFRP materials also allow the fabrication of translucent structural components with high degree of transparency when optically aligned resins and glass fibers are used, i.e. their refractive indices are identical. In this study the total light transmittance of hand lay-up GFRP laminates for building construction was investigated with a view to two architectural applications: translucent load-bearing structures and the encapsulation of photovoltaic (PV) cells into GFRP building skins of sandwich structures. Spectrophotometric experiments using an integrating sphere set-up were performed on unidirectional and cross-ply GFRP specimens in the range from 20% to 35% fiber volume fraction. Results were compared with the shortcircuit currents generated by amorphous silicon (a-Si) PV cells encapsulated in GFRP laminates exposed to artificial sunlight radiation. The total amount of fibers in the laminates was the major parameter influencing light transmittance, with fiber architecture having little effect. 83% of solar irradiance in the band of 300-800 nm reached the surface of a-Si PV cells encapsulated below structural GFRP laminates with a fiber reinforcement weight of 820 g/m2, demonstrating the feasibility of conceiving multifunctional GFRP structures.

EPFL Solar Energy and Building Physics Laboratory (LESO-PB)2013

Translucent load-bearing GFRP envelopes for daylighting and solar cell integration in building construction

Carlos Pascual Agullo

This project investigates the light transmittance of load-bearing glass fiber-reinforced polymer (GFRP) laminates with a view to two architectural applications: the daylighting of buildings through load-bearing translucent GFRP envelopes and encapsulation of solar cells into the GFRP building skins of sandwich structures. The total and diffuse visible light transmittances of the laminates were experimentally investigated using a spectrophotometer coupled to an integrating sphere. The refractive indices of polymeric resin and glass fibers were also investigated and numerical ray-tracing simulations were performed to demonstrate the experimentally observed wavelength dependency of light diffusion. The total transmittance and translucency of GFRP laminates were analytically modeled as a function of the reinforcement weight, fiber architecture and fiber volume fraction. Goniophotometric experiments – performed to investigate the directional light scattering of laminates reinforced with different fiber architectures – were demonstrated as an effective method to predict the fiber architecture of translucent GFRP laminates. The optical properties of the laminates, i.e. the total and diffuse transmittances and directionality of light diffusion, were correlated with the experimentally investigated mechanical properties, i.e. the directional tensile strength and E-modulus. The experimental work demonstrated that structural skylights could be designed with GFRP laminates exhibiting a translucency of 0.9 and total light transmittance of 0.5 – minimum values recommended for daylighting of buildings through translucent envelopes – and that solar cells could be encapsulated in load-bearing GFRP laminates with a total light transmittance of around 0.83. A case study was performed using the GFRP/polyurethane sandwich roof of the Novartis Campus Main Gate Building to demonstrate the basic feasibility of integrating skylights and solar cells into the external translucent skin of optimized sandwich structures. Finally, the encapsulation of transparent and colored dye solar cells in translucent GFRP laminates has been explored. Prototype solar panels have been fabricated and a significant weight reduction, increase in structural strength and around 10% reduction of electrical efficiency compared to traditional solar panels with glass encapsulants were achieved.

EPFL2014

Translucent load-bearing GFRP envelopes for daylighting and solar cell integration in building construction

Carlos Pascual Agullo

EPFL2014