Micromirrors for integrated tunable mid-infrared detectors and emitters
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The “Modulated Friction Inertial Drive (MFID) principle” is presented as a locomotion solution for mmsize micro robots dealing with both size constraints and limitations in terms of power consumption. Based on one of the configurations of this locomotion p ...
Gallium Nitride (GaN) and its ternary alloys with aluminium and indium have met a growing interest in the last decade. These semiconductors have a large direct bandgap and can be doped with either silicon (Si) for n-type and magnesium (Mg) for p-type layer ...
Photoacoustic spectroscopy is a widely recognised technique to measure trace gases at parts-per-million (ppm) or parts-per-billion (ppb) level using semiconductor laser in the near infrared range. This technique is based on the generation of an acoustic wa ...
Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distribut ...
Periodic structures, such as frequency-selective surfaces (FSSs) and photonic band-gap (PBG) materials, exhibit total reflection in specific frequency bands while total transmission in other bands. They find numerous applications in a large field of the el ...
A photoacoustic multi-gas sensor using tuneable laser diodes in the near-infrared region is reported. An optimized resonant configuration based on an acoustic longitudinal mode is described. Automatic tracking of the acoustic resonance frequency using a pi ...
In this paper, we present the design, simulation, fabrication, and some measurement and characterization of a novel 16-bit digital variable optical attenuator (VOA) that attenuates by switching individual mirror of an array as an attempt to achieve input v ...
A four-wavelength low-power continuous-wave frequency laser reference system has been realised in the 935.4-nm range for water vapour differential absorption lidar (DIAL) applications. The system is built around laboratory extended-cavity and DFB diode las ...
We have developed a hybrid scanning probe microscopy sensor consisting of a SU-8 body and full platinum cantilever and tip. The fabrication process is based on surface-micromachining of a silicon wafer, where oxidation sharpened moulds define the tip shape ...
We demonstrated a continuously tunable optofluidic distributed feedback (DFB) dye laser on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip. The optical feedback was provided by a phase-shifted higher order Bragg grating embedded in the liquid cor ...
