Probing the Strength and Fracture Toughness of Hard Second Phases at the Micron Scale
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...
A probabilistic method for the strength prediction of adhesively bonded double lap joints composed of pultruded GFRP adherends subjected to quasi-static axial tensile loading is presented. The prediction method is based on the experimentally determined mat ...
The fracture toughness of thin metal films confined between elastic layers is studied using a two-dimensional discrete dislocation (DD) method. Fracture along the metal/substrate interface is permitted through the use of a cohesive zone model. The predicte ...
The purpose of this thesis is to characterize internal strains in polymeric materials due to consolidation. In view of this, optical Fiber Bragg Grating sensors are an excellent non-destructive tool for internal strain characterization and damage detection ...
The fracture strength of silicon nanowires grown on a [111] silicon substrate by the vapor-liquid-solid process was measured. The nanowires, with diameters between 100 and 200 nm and a typical length of 2 μm, were subjected to bending tests using an atomic ...
A two-dimensional finite element model is developed to investigate intergranular fracture in alumina under compression. The grain interiors are modeled as anisottopic elastic and the properties of the grain boundaries are fitted from experimental data. Mat ...
Determination of fracture parameters for brittle coatings with a sub-micron thickness is not a straightforward task. Since direct evaluation through testing with for instance a double cantilever beam or compact tension tests is hardly applicable due to the ...
Nanostencil lithography is considered a promising emerging nanopatterning method due to its simple process flow, low cost, little restriction on materials, and high compatibility with organic or biological surfaces. The principle of shadow mask deposition ...
