Investigation of Flow Separation Control by Nanosecond Pulsed Dielectric Barrier Discharge Actuators

The ability of nanosecond pulsed DBD actuators to control flow separation was investigated on a NACA 0015 profile for velocities reaching Re = 230,000 (24 m/s). The optimal location for the actuator was determined from oil flow experiments. Moderate voltage levels were applied (3 and 6 kV) and the actuator was operated at frequencies ranging from 0.058 to 10 kHz, in pulse and burst modes. The peak effectiveness of the actuator occurred at reduced frequency values of around 1. Plasma influence was observed at all tested angles of attack (up to 26°), and the stall angle was delayed by 8°.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (3)

Plasma (physics)

Plasma () is one of four fundamental states of matter, characterized by the presence of a significant portion of charged particles in any combination of ions or electrons. It is the most abundant form of ordinary matter in the universe, being mostly associated with stars, including the Sun. Extending to the rarefied intracluster medium and possibly to intergalactic regions, plasma can be artificially generated by heating a neutral gas or subjecting it to a strong electromagnetic field.

Actuator

An actuator is a component of a machine that is responsible for moving and controlling a mechanism or system, for example by opening a valve. In simple terms, it is a "mover". An actuator requires a control device (controlled by control signal) and a source of energy. The control signal is relatively low energy and may be electric voltage or current, pneumatic, or hydraulic fluid pressure, or even human power. Its main energy source may be an electric current, hydraulic pressure, or pneumatic pressure.

Angle

In Euclidean geometry, an angle is the figure formed by two rays, called the sides of the angle, sharing a common endpoint, called the vertex of the angle. Angles formed by two rays are also known as plane angles as they lie in the plane that contains the rays. Angles are also formed by the intersection of two planes; these are called dihedral angles. Two intersecting curves may also define an angle, which is the angle of the rays lying tangent to the respective curves at their point of intersection.