Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-ray Diffraction During Casting
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hot tear formation has been observed during the solidification of a succinonitrile–acetone (SCN-acetone) alloy by pulling the columnar dendrites in the transverse direction with a stick. It is observed that the cracking of the mushy zone (hot tears) always ...
When wetting is promoted by interfaces, the rate at which the liquid spreads over the solid substrate is controlled by the rate at which the well-wetted interfacial product can be formed along the liquid/solid/atmospheric triple line. If this reaction invo ...
As for most of the topics in the field of solidification, Mert Flemings has always pioneered new ideas. While much of the understanding of hot tearing formation was already known about 30 years ago, he devised with Metz an interesting apparatus for studyin ...
As for most of the topics in the field of solidification, Mert Flemings has always pioneered new ideas. While much of the understanding of hot tearing formation was already known about 30 years ago, he devised with Metz an interesting apparatus for studyin ...
In order to eliminate internal and surface defects, which appear in the ingots during continuous casting of metallic alloys, homogeneous and fine structures are often required. Therefore, when the adjunction of inoculant substances is not possible, the ele ...
The thermotropic phase diagram of 1:1 co-crystals of hexamethylenetetramine and pimelic acid (heptanedioic acid) is investigated. Three crystalline phases are identified at ambient pressure. Phase I is disordered, as revealed by diffuse rods in its diffrac ...
A Multicomponent Aerosol Dynamics Model (MADM) capable of solving the condensation/evaporation equation of atmospheric aerosols is presented. Condensable species may be organic and/or inorganic. For the inorganic constituents the equilibrium model ISORROPI ...
An X-ray study of three phase transitions (PTs) at 86, 78 and 72 K has been carried out for the trigonal modification of the Cs3Sb2I9 crystal (space group P-3m1, a = 8.460 Angstrom, c = 10.398 Angstrom). The T-c1 = 86 K PT preserves the trigonal symmetry a ...
A new criterion for the appearance of hot tears in metallic alloys is proposed. Based upon a mass balance performed over the liquid and solid phases, it accounts for the tensile deformation of the solid skeleton perpendicular to the growing dendrites and f ...
The authors describe a two-dimensional high-resoln. solid-state NMR methodol. for correlating the dynamics of mol. rearrangements around the crit. points of equil. phase transitions in mol. solids. It combines the techniques of temp.-jump and two-dimension ...
