Publication

750 nm 1.5 W frequency-doubled semiconductor disk laser with a 44 nm tuning range

Related publications (89)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

Mode-Specific Coupling of Nanoparticle-on-Mirror Cavities with Cylindrical Vector Beams

Christophe Marcel Georges Galland, Valeria Vento, Sachin Suresh Verlekar, Philippe Andreas Rölli

Nanocavities formed by ultrathin metallic gaps, such as the nanoparticle-on-mirror geometry, permit the reproducible engineering and enhancement of light-matter interaction thanks to mode volumes reaching the smallest values allowed by quantum mechanics. A ...

arXiv2023

, ,

Nanocavities formed by ultrathin metallic gaps permitthe reproducibleengineering and enhancement of light-matter interaction, withmode volumes reaching the smallest values allowed by quantum mechanics.While the enhanced vacuum field in metallic nanogaps ha ...

AMER CHEMICAL SOC2023

We experimentally investigate fluctuations in the spectrum of ultrashort laser pulses propagating in air, close to the critical power for filamentation. Increasing the laser peak power broadens the spectrum while the beam approaches the filamentation regim ...

Optica Publishing Group2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021

We have developed a robust and universal method to transfer functionalized SU-8 microparts with metallic patterns by laser-induced forward transfer (LIFT) technique. To overcome the difficulty of metal patterning on high-aspect ratio SU-8 microparts on the ...

2021

, , ,

We show a novel architecture for massively parallel FMCW LiDAR based on multiheterodyne mixing of two triangular chirped soliton microcombs generated in integrated Si3N4 microresonators using a single laser source and a single coherent receiver. We demonst ...

IEEE2021

Despite extensive research efforts in the field of laser welding, the imperfect repeatability of the weld quality still represents an open topic. Indeed, the inherent complexity of the underlying physical phenomena prevents the implementation of an effecti ...

2020

We report the observation of acoustic topological Fano resonance, and demonstrate their robustness to im- perfections. By going beyond the performance degradations caused by inadvertent flaws occurring during fabrication process, such topologically protect ...

2019